MY10 Liberty - Interior & Exterior Lighting

MY10 Liberty - Interior & Exterior Lighting

Postby hks180 » Mon Oct 04, 2010 10:05 pm

Parker
Image
With GenV the parker is exposed, therefore i didn't really want to use big LED parker as it will look ugly so i went for the T10 - 1.5W LED parker but if you don't mind the look then you can try other parker with more LED.
Image
T10 - 1.5W - $15/pair

Xenon Low Beam
Image
Image
As the car came with factory xenon the temp looks like 4000 to 4300k (warm white - white with tinge of yellow) So i've replace the low beam bulb to 5000k D2S bulb - (Pure white). Might try the 6000k down the track.
Image
D2S 5000 or 6000k bulb - $50/pair


Image
With GenV is lot easier to replace the number plate lights as you don't need special tools to remove the clips (sedan anyway)
Image
T10 - 5SMD LED - $15/pair

Map Light
Image
6SMD Festoon LED will do the job just right - but if you want really bright light then you can try using 12,16 or 24 SMD LED panel
Image
6SMD Festoon LED - $20/pair

Dome Light
Image
24SMD LED Panel and Dome light is exactly same as Gen IV.
Image
24SMD LED Panel - $30ea

Door - courtesy light
Image
I used the T10 - 5SMD , but if you want it brighter you can use the 12 SMD LED Panel.
Image
T10 - 5SMD - $15/pair

Boot
Image
Standard
Image
3 x (5050) 30cm LED strips
Image
Now it lights up the whole boot and lot brighter !
5050SMD LED Strip - $15/30cm strip - 3 x $15 = $45


If you got any question feel free to ask.

Leo
Last edited by hks180 on Tue Nov 20, 2012 9:48 am, edited 1 time in total.
[TEAM FUNERAL]
HID & LED >> CLICK HERE
User avatar
hks180
 
Posts: 2259
Joined: Mon Oct 09, 2006 7:00 am
Location: Sydney

Re: MY10 Liberty - Interior & Exterior Lighting

Postby smythie » Tue Oct 05, 2010 8:49 am

I see Advan porn on the corkboard :D
Flag Bitch

MY06 3.0RB
User avatar
smythie
 
Posts: 5227
Joined: Mon Oct 27, 2008 12:46 pm
Location: Sydney (w-end)
Car: MY06 3RB - Blue

Re: MY10 Liberty - Interior & Exterior Lighting

Postby hks180 » Tue Oct 05, 2010 9:25 am

HAHAHA ... one part of the wall is full of those kind of porn !!!

Leo
[TEAM FUNERAL]
HID & LED >> CLICK HERE
User avatar
hks180
 
Posts: 2259
Joined: Mon Oct 09, 2006 7:00 am
Location: Sydney

Re: MY10 Liberty - Interior & Exterior Lighting

Postby swingn » Tue Oct 05, 2010 11:34 am

Good work Leo! Already looking after the ever growing Gen 5 market :D

Now what about looking after the EVO X market? ;) :lol:
User avatar
swingn
-stickered-
 
Posts: 4163
Joined: Wed Feb 20, 2008 1:11 pm
Location: Sydney, NSW
Car: MX5 SE / 911 Turbo
Real name: Matt
Profile URL: www.rtdc.com.au

Re: MY10 Liberty - Interior & Exterior Lighting

Postby hks180 » Tue Oct 05, 2010 12:05 pm

swingn wrote:Good work Leo! Already looking after the ever growing Gen 5 market :D

Now what about looking after the EVO X market? ;) :lol:


haha ,,, yes ..

Hey when ever your free mate ... u got my number and u know where i live ! haha

Leo
[TEAM FUNERAL]
HID & LED >> CLICK HERE
User avatar
hks180
 
Posts: 2259
Joined: Mon Oct 09, 2006 7:00 am
Location: Sydney

Re: MY10 Liberty - Interior & Exterior Lighting

Postby swingn » Wed Oct 06, 2010 8:01 am

^^^ We'll tee up a time mate & we'll get all the EVO stuff sorted out :D Hopefully be able to get some more sales my friend :D
User avatar
swingn
-stickered-
 
Posts: 4163
Joined: Wed Feb 20, 2008 1:11 pm
Location: Sydney, NSW
Car: MX5 SE / 911 Turbo
Real name: Matt
Profile URL: www.rtdc.com.au

Re: MY10 Liberty - Interior & Exterior Lighting

Postby garbo41610 » Mon Dec 06, 2010 10:12 am

hey bud, got any suggestions for an LED that put out a more white light for the parkers??? I've got the old ones in there that I bought off you a while back and they are a bit too blue for my liking. Also, the LEDs on one side aren't working anymore so they need replacing anyways.

I need some LEDs for the dome light as well :-)
Car(s): Steel Silver MY10 GT Wagon + 1985 Subaru Sherpa

Mods: (GT) HKS Panel Filter. The HKS I put in the MY10 is the same filter I took out of my MY05 GT. So yes, they do fit. Custom leather heel pad to minimise carpet wear in the drivers footwell. Slotted front rotors. (Sherpa) 14'' 6 Spoke mags, Chrome Gear Shift (sick!), Alloy Pedals (sicker!), new positive and negative battery terminals, Alpine cda-9827 H/U, JBL GT 6x9's boxed and mounted (sickest!), Kicker DS650.2 component speakers mounted in the footwells in flibreglass pods, Alpine MRP-F200 4 channel amp (4x40wRMS), Rebadged with hektik chrome eBay badges, STi stickers for more powaaaa, "leather" handbrake boot, recarpetted with grey/black car carpet from Bunnings, sick Clarke Rubber boot mat, polished and waxed.
User avatar
garbo41610
-stickered-
 
Posts: 1786
Joined: Thu Jun 11, 2009 11:28 am
Location: Emu Heights and Randwick depending on time of day
Car: MY10 GT Wagon Steel Silver
Real name: Phil

Re: MY10 Liberty - Interior & Exterior Lighting

Postby hks180 » Mon Dec 06, 2010 8:21 pm

garbo41610 wrote:hey bud, got any suggestions for an LED that put out a more white light for the parkers??? I've got the old ones in there that I bought off you a while back and they are a bit too blue for my liking. Also, the LEDs on one side aren't working anymore so they need replacing anyways.

I need some LEDs for the dome light as well :-)



Hey Phil

i got the dome light ...

and for the parker try the 5SMD .. as they match the standard xenon bit better ..

Leo
[TEAM FUNERAL]
HID & LED >> CLICK HERE
User avatar
hks180
 
Posts: 2259
Joined: Mon Oct 09, 2006 7:00 am
Location: Sydney

Re: MY10 Liberty - Interior & Exterior Lighting

Postby hks180 » Fri Mar 04, 2011 2:07 pm

For those people want very bright interior ..... 8)

soon i will have 36 (5050) LED panels for your dome light ..

Leo
[TEAM FUNERAL]
HID & LED >> CLICK HERE
User avatar
hks180
 
Posts: 2259
Joined: Mon Oct 09, 2006 7:00 am
Location: Sydney

Re: MY10 Liberty - Interior & Exterior Lighting

Postby tangcla » Fri Mar 04, 2011 2:39 pm

hks180 wrote:HAHAHA ... one part of the wall is full of those kind of porn !!!

Are the other parts of the wall filled with other kinds of porn? :P
www.tangcla.com - photography

Canon 5D Mark III x2 | 16-35mm f/2.8L | 24-70mm f/2.8L IS | 70-200mm f/2.8L IS
100mm f/2.8L IS macro | 200mm f/2.0L IS | 580EX-II x2 | 430EX-II | PocketWizard TT1/TT5
User avatar
tangcla
 
Posts: 7409
Joined: Wed Aug 15, 2007 1:47 pm
Location: Melbourne, VIC
Car: B6 Audi S4 (4.2L V8)
Real name: Clarence
Profile URL: http://www.tangcla.com

Re: MY10 Liberty - Interior & Exterior Lighting

Postby garbo41610 » Thu Apr 07, 2011 1:04 pm

Hey Leo,

The dash lights on my Sherpa are just about had it (can hardly see the speedo at night). I am pretty sure from the last time I took the cluster apart they are a bayonet type fitting. Do you know of any bayonet base LEDs????
Car(s): Steel Silver MY10 GT Wagon + 1985 Subaru Sherpa

Mods: (GT) HKS Panel Filter. The HKS I put in the MY10 is the same filter I took out of my MY05 GT. So yes, they do fit. Custom leather heel pad to minimise carpet wear in the drivers footwell. Slotted front rotors. (Sherpa) 14'' 6 Spoke mags, Chrome Gear Shift (sick!), Alloy Pedals (sicker!), new positive and negative battery terminals, Alpine cda-9827 H/U, JBL GT 6x9's boxed and mounted (sickest!), Kicker DS650.2 component speakers mounted in the footwells in flibreglass pods, Alpine MRP-F200 4 channel amp (4x40wRMS), Rebadged with hektik chrome eBay badges, STi stickers for more powaaaa, "leather" handbrake boot, recarpetted with grey/black car carpet from Bunnings, sick Clarke Rubber boot mat, polished and waxed.
User avatar
garbo41610
-stickered-
 
Posts: 1786
Joined: Thu Jun 11, 2009 11:28 am
Location: Emu Heights and Randwick depending on time of day
Car: MY10 GT Wagon Steel Silver
Real name: Phil

Re: MY10 Liberty - Interior & Exterior Lighting

Postby hks180 » Fri Apr 08, 2011 10:23 pm

garbo41610 wrote:Hey Leo,

The dash lights on my Sherpa are just about had it (can hardly see the speedo at night). I am pretty sure from the last time I took the cluster apart they are a bayonet type fitting. Do you know of any bayonet base LEDs????


hey Phil

Sorry mate no bayonet type ..

Leo
[TEAM FUNERAL]
HID & LED >> CLICK HERE
User avatar
hks180
 
Posts: 2259
Joined: Mon Oct 09, 2006 7:00 am
Location: Sydney

Re: MY10 Liberty - Interior & Exterior Lighting

Postby garbo41610 » Sat Apr 09, 2011 9:41 am

All good bud, I need to get one of the SMD panels off you at some stage. Just need to check which one it is, the same one I have in the GT fits perfectly to the mm in the light fitting in the Sherpa.
Car(s): Steel Silver MY10 GT Wagon + 1985 Subaru Sherpa

Mods: (GT) HKS Panel Filter. The HKS I put in the MY10 is the same filter I took out of my MY05 GT. So yes, they do fit. Custom leather heel pad to minimise carpet wear in the drivers footwell. Slotted front rotors. (Sherpa) 14'' 6 Spoke mags, Chrome Gear Shift (sick!), Alloy Pedals (sicker!), new positive and negative battery terminals, Alpine cda-9827 H/U, JBL GT 6x9's boxed and mounted (sickest!), Kicker DS650.2 component speakers mounted in the footwells in flibreglass pods, Alpine MRP-F200 4 channel amp (4x40wRMS), Rebadged with hektik chrome eBay badges, STi stickers for more powaaaa, "leather" handbrake boot, recarpetted with grey/black car carpet from Bunnings, sick Clarke Rubber boot mat, polished and waxed.
User avatar
garbo41610
-stickered-
 
Posts: 1786
Joined: Thu Jun 11, 2009 11:28 am
Location: Emu Heights and Randwick depending on time of day
Car: MY10 GT Wagon Steel Silver
Real name: Phil

Re: MY10 Liberty - Interior & Exterior Lighting

Postby hks180 » Sat Apr 09, 2011 10:49 pm

garbo41610 wrote:All good bud, I need to get one of the SMD panels off you at some stage. Just need to check which one it is, the same one I have in the GT fits perfectly to the mm in the light fitting in the Sherpa.


not a problem .. got plenty in stock !

Leo
[TEAM FUNERAL]
HID & LED >> CLICK HERE
User avatar
hks180
 
Posts: 2259
Joined: Mon Oct 09, 2006 7:00 am
Location: Sydney

Re: MY10 Liberty - Interior & Exterior Lighting

Postby garbo41610 » Mon Apr 11, 2011 9:32 pm

Good man. Will let you know ASAP.

I was thinking on the way home tonight that the cup holders in the GenV could do with a couple of small LEDs in them somewhere, any suggestions???
Car(s): Steel Silver MY10 GT Wagon + 1985 Subaru Sherpa

Mods: (GT) HKS Panel Filter. The HKS I put in the MY10 is the same filter I took out of my MY05 GT. So yes, they do fit. Custom leather heel pad to minimise carpet wear in the drivers footwell. Slotted front rotors. (Sherpa) 14'' 6 Spoke mags, Chrome Gear Shift (sick!), Alloy Pedals (sicker!), new positive and negative battery terminals, Alpine cda-9827 H/U, JBL GT 6x9's boxed and mounted (sickest!), Kicker DS650.2 component speakers mounted in the footwells in flibreglass pods, Alpine MRP-F200 4 channel amp (4x40wRMS), Rebadged with hektik chrome eBay badges, STi stickers for more powaaaa, "leather" handbrake boot, recarpetted with grey/black car carpet from Bunnings, sick Clarke Rubber boot mat, polished and waxed.
User avatar
garbo41610
-stickered-
 
Posts: 1786
Joined: Thu Jun 11, 2009 11:28 am
Location: Emu Heights and Randwick depending on time of day
Car: MY10 GT Wagon Steel Silver
Real name: Phil

Next

Return to hks180 LEDs & HIDs

Who is online

Users browsing this forum: No registered users and 1 guest