club.liberty.asn.au

Morning all! I have been doing a bit of research on Hub rings and think it's a good idea to put these on to make my CE28's sit nice and snug and do away with the possibilty of shuddering at speed. The last thing I want is my wheels overtaking me on the F5

Is there anybody that can please tell me the size of the centre bore of Volk Racing CE28N's and the actual hub size on the MY05 Liberty.

If someone could help with sizes or point me in the right direction of where I can purchase (or even get them made up) I would be most grateful.

Cheers

rnr

the hub is 56.1

NFI the CE28N

but i suspect it's 73.1 (or 73.0, there's only one, not both avaliable in the market)

btw: the NF is NOT 73.1... i found out the hard way.

Thanks fella, I am leaning towards 73.00 x 56.1 myself. I phoned Subaru in Alexandria and was told that relevant info was not in service manual

It would be nice to 100% know the correct sizes though, esp if they go up in .1 increments.

overl0ad wrote:the hub is 56.1

NFI the CE28N

but i suspect it's 73.1 (or 73.0, there's only one, not both avaliable in the market)

btw: the NF is NOT 73.1... i found out the hard way.

ive got a set for all model cars

$69 a set of 4

T-REXX wrote:ive got a set for all model cars

$69 a set of 4

So can you confirm sizes of 73.0 x 56.1 Troy! and did you find relevant info regarding those Teins you are selling? Suitable for wagon or not ????

rnr

not suitable for the Wagon

illl pm you what i have in the Hubcentric but i have all Subarus available so ill double check the specs

Troy

Thanks troy, appreciate your help, might have to come up with an alternative regarding coilovers

T-REXX wrote:not suitable for the Wagon

illl pm you what i have in the Hubcentric but i have all Subarus available so ill double check the specs

Troy