Page 1 of 1
WTB - Aftermarket H6 4gen mid Y pipe
Posted:
Fri Jul 05, 2019 2:25 pmby 77T
Got some sti quads and the sound difference is hardly anything so want a bigger mid Y pipe
Re: WTB - Aftermarket H6 4gen mid Y pipe
Posted:
Mon Jul 08, 2019 9:37 pmby RX25SE
Not sure that a bigger Y pipe will make it any louder, if that's what you are after.
I have played around with the exhaust on my old Gen III and my current GenIV, removing the center resonator, changing mufflers etc. and the one thing I noticed is the factory mufflers do a good job of shutting up the noise, pretty much regardless of whats been done upstream.
Re: WTB - Aftermarket H6 4gen mid Y pipe
Posted:
Tue Jul 09, 2019 11:29 amby 77T
RX25SE wrote:Not sure that a bigger Y pipe will make it any louder, if that's what you are after.
I have played around with the exhaust on my old Gen III and my current GenIV, removing the center resonator, changing mufflers etc. and the one thing I noticed is the factory mufflers do a good job of shutting up the noise, pretty much regardless of whats been done upstream.
Hmm ok will keep in mind. Maybe changing the cats would give a different note,want a more metallic sound not just bass
Thanks for info
Re: WTB - Aftermarket H6 4gen mid Y pipe
Posted:
Tue Jul 09, 2019 1:02 pmby RX25SE
Cats will make virtually no difference to note, and none to power. If you put hi-flow cats on it will most likely start throwing cat efficiency fault codes. The third cat can be removed without any fault code issues, as it's not monitored by the ECU.
STi quads are a factory item so they will never be loud, you are probably best to change the mufflers if you are after a 'raspy' sound. You could try removing the center resonator, this may make it louder but with a little more drone.