|SWAP| Tein S-tech for standard Bilstein Gen 4 Liberty [NSW]

If you want to buy something hard to find, ask here.

|SWAP| Tein S-tech for standard Bilstein Gen 4 Liberty [NSW]

Postby jet111 » Sun Nov 26, 2017 9:58 am

Swap Soft Tein S-tech springs for your standard Bilstein GT or GT-B springs
Location Sydney, Inner West
Contact zero four double one, six double two, nine two seven

This setup is just too low for me as I carry a lot of gear, I have put 0 K's on them since purchase

The following is copied and pasted from the original owner (I purchased them on here):

"s-techs have done around 20 000 kms.
These have come off a wagon also bolt on to a sedan. My research says the rears will sit 5-6mm higher on a sedan. Please DYOR.
On a wagon this set up will sit about 45mm lower than stock std (non 3.0RB,GT-B ), 3.0RB, GT-B Tein s-techs will sit 30mm lower than stock. DYOR"

Contact me anytime

Thanks!
User avatar
jet111
 
Posts: 11
Joined: Thu Jan 02, 2014 8:28 pm
Car: MY04 GT Wagon
Real name: Mark

Return to Wanted to Buy

Who is online

Users browsing this forum: No registered users and 4 guests