Looking for a front and rear set for a 2004 sedan 3.0r Auto
Cheers
Sean82 wrote:They won't. They're from a GD. You need GR/GV to fit. BUT, they won't bolt straight in.
For the rears, you'll need a longer bolt at the bottom of the shock as the slightly different setup in the GR/GV WRX and STi means that the bottom bolt hole in the rears are about 5-6mm fatter (hence the need for a slightly longer bolt). This applies to WRX and STi gear.
Fronts from an STi would need slight modding to the top (I think) bolt hole in the clevis (bit that attaches to the hub). Here's how: http://www.subaruforester.org/vbulletin ... fxt-65674/ (don't worry it's for a 2009 Foz, the GenIV shares the same front hub assembly). This only applies to STi front struts; the WRX has the same 5x100 hub and this bolt spacing
Cheers
Sean..
codylibertysti241 wrote:I'm buying Tein coil overs in the near future, I'll let you know when I've pulled mine out if you still need them
Users browsing this forum: No registered users and 6 guests