club.liberty.asn.au

I have a power steering pump I want to use as it is basically new.
Trouble is that it is missing the the fitting that bolts on top for the return hose.

Anyone have one laying about

Off a 2007 turbo legacy

Not sure if it is helps but the pump has the high pressure line on the side

Thanks

Just use the fitting off the pump u are replacing.

Not 100% sure but I think that top fitting is universal on all Gen4 Liberty's.

Thanks for the reply

Using the one I have was my first thought but they are different.
I have a wrx STI pump in there ATM
From memory the bolt hole is in a different location.

It is a 4 to 5 week wait for one from suabru