I have a power steering pump I want to use as it is basically new.
Trouble is that it is missing the the fitting that bolts on top for the return hose.
Anyone have one laying about
Off a 2007 turbo legacy
Not sure if it is helps but the pump has the high pressure line on the side
Thanks
Australian Liberty Owners Club
Power steering pump part
3 posts
• Page 1 of 1
Power steering pump part
by blackduck30 » Thu Mar 27, 2014 2:21 pm
- blackduck30
- Posts: 46
- Joined: Thu Aug 01, 2013 6:15 pm
- Location: Wollongong NSW
- Car: XT forester
Re: Power steering pump part
by PUDZ RSC3.0RB » Fri Mar 28, 2014 1:58 am
Just use the fitting off the pump u are replacing.
Not 100% sure but I think that top fitting is universal on all Gen4 Liberty's.
Not 100% sure but I think that top fitting is universal on all Gen4 Liberty's.
- PUDZ RSC3.0RB
- Posts: 563
- Joined: Wed Mar 27, 2013 9:53 pm
- Car: 05 Liberty Trolly
- Profile URL: viewtopic.php?f=10&t=22581
Re: Power steering pump part
by blackduck30 » Fri Mar 28, 2014 7:16 am
Thanks for the reply
Using the one I have was my first thought but they are different.
I have a wrx STI pump in there ATM
From memory the bolt hole is in a different location.
It is a 4 to 5 week wait for one from suabru
Using the one I have was my first thought but they are different.
I have a wrx STI pump in there ATM
From memory the bolt hole is in a different location.
It is a 4 to 5 week wait for one from suabru
- blackduck30
- Posts: 46
- Joined: Thu Aug 01, 2013 6:15 pm
- Location: Wollongong NSW
- Car: XT forester
3 posts
• Page 1 of 1
Who is online
Users browsing this forum: No registered users and 7 guests