EOI/WTB: Gen IV Suspension Bits
I went to Pedders Suspension in Mascot on Wednesday afternoon for a Tech Check & Report just to see how my suspension was going and as a pre-check before getting a wheel alignment performed.
Not the best news.
Here is a list of things that failed the test (quotes from Pedders are in brackets):
So here is the reason why I am starting this topic; I am in need of replacement parts for the above. The shocks I won't be in any rush to replace as they are barely leaking, but the main thing I'm looking for are lower control arm bushes and the LH front wheel bearing.
I am in no place to spend top dollar either, hence the EOI. There is a member on SubyClub who has some hardened rubber HARDRACE bushes going for $130 and Mark (CRUISN) is currently getting me a price for some Whiteline buses, but I'm just wanting to weigh up my options and figure out the best way to go about things that is affordable for me.
Thanks in advance for your help everyone. The sooner I get this outta the way the sooner I can get my exhaust bits and pieces.
Not the best news.
Here is a list of things that failed the test (quotes from Pedders are in brackets):
- Front RH shock has just starting to leak
- Lower control arm bushes are worn ($380)
- LH front wheel bearing is worn ($400)
- Rear shocks just starting to leak
So here is the reason why I am starting this topic; I am in need of replacement parts for the above. The shocks I won't be in any rush to replace as they are barely leaking, but the main thing I'm looking for are lower control arm bushes and the LH front wheel bearing.
I am in no place to spend top dollar either, hence the EOI. There is a member on SubyClub who has some hardened rubber HARDRACE bushes going for $130 and Mark (CRUISN) is currently getting me a price for some Whiteline buses, but I'm just wanting to weigh up my options and figure out the best way to go about things that is affordable for me.
Thanks in advance for your help everyone. The sooner I get this outta the way the sooner I can get my exhaust bits and pieces.