Page 1 of 2
Spec.B badge

Posted:
Wed Jan 16, 2008 7:54 am
by alcapone26
Anyone have a Spec.B badge for my Liberty?

Posted:
Fri Feb 01, 2008 7:11 pm
by QKSLVR
That would so not be a decent swap!

Posted:
Fri Feb 01, 2008 7:27 pm
by Ric
QKSLVR wrote:That would so not be a decent swap!
huh?
What's to swap, you just add it...

funny

Posted:
Fri Feb 01, 2008 11:48 pm
by honkas
that's a good one!!!
i'll give u my spec b badge for
your liberty.. ok??


Posted:
Sat Feb 02, 2008 6:57 am
by Ric
ahh ok, I was a bit slow yesterday. I get it now


Posted:
Sat Feb 02, 2008 7:22 am
by alcapone26
Was just going to put the badge in my pocket n walk around..

specb badge

Posted:
Wed Feb 20, 2008 8:47 am
by jp928
Ok, I got my 2 badges. One is available. Cost me US$102.40 delivered ~=A$114, so $57 + postage to first to PM me.
FYI I got them from Chaplin Automotive in Washington state (AKA subarugenuineparts.com, P/no=93073AG560), ordered 12 Feb, arrived today, USPS flat rate envelope at US$12.50. They are flat (4mm), you would probably get 6 in the same envelope at the same postage rate. The web site doesnt calculate the postage properly, but I made email conatact with a Jamie in web sales, and he fixed it fine.
Can somebody who has installed one of these please advise how they went about it? Peel cover off the sticky back of the Spec B part, but leave it on the Legacy part, line up Legacy over Liberty, and stick it down?
Thanks,
jp

Posted:
Wed Feb 20, 2008 9:22 am
by WhiteGTB
JP, I stuck my Legacy (without the Spec B) part on recently
It should come in a blue template, I hope you got this as it lines up with the corners of the rear bootlid and lights and all you need to do is peel the back of the badge off, line it up and press.
I only had the Legacy part so I lined the Spec B part up first and then stuck it upways. Hope that helps!
End result below (without the Spec B) I think it is straight enough


Posted:
Wed Feb 20, 2008 10:28 am
by jp928
Thanks Trieu. My only problem is mine is a wagon....but I will use your pic as a guide to where it should go.
jp

Posted:
Wed Feb 20, 2008 10:42 am
by Ric
I cut the foam right below the "Legacy" section (which incidentally is the one now on Trieu's car

)
Then lined the top edge of the foam up with the bottom of the existing "Liberty" badge (and centred it left to right).
Voila


Posted:
Wed Feb 20, 2008 12:36 pm
by jp928
Thanks Ric, looks excellent!
jp

Posted:
Wed Feb 20, 2008 3:39 pm
by Spec B Wgn
on the wgns they can tend to look a bit crooked because of the lines of the rear panel and the boot lid.

Posted:
Wed Feb 20, 2008 3:59 pm
by 04GT
Trieu, was it hard debadging your liberty to stick the legacy one on?

Posted:
Wed Feb 20, 2008 6:32 pm
by MY07GT
Hi guys!
For those who wish to purchase a Legacy/Spec B combo badge, please PM me.
Sleepergtb bought me one ages ago but i have now decided on something else....... black chrome and Phat GT's backyard performance carbon subaru badges! LOL!
7 badges down due to testing. We have made sucessful progress with 2! LOL!
Phil.

Posted:
Wed Feb 20, 2008 6:50 pm
by MY07GT
Sorry forgot to mention price.
$86 pick up in NSW which is what i paid for them or plus whatever delivery costs me for interstate buyers.
Phil.