club.liberty.asn.au

hey people!
ive purchased a set of XXR 527's 18 x 8.75

+35 offset for the fronts
+20 offset for the rears

only thing is the set of rims come with centre caps but no lug nuts.
do you know where i can buy some decent lug nuts and what price would i be looking at ?!?!?!

thanks guys

libz05 wrote:hey people!
ive purchased a set of XXR 527's 18 x 8.75

+35 offset for the fronts
+20 offset for the rears

only thing is the set of rims come with centre caps but no lug nuts.
do you know where i can buy some decent lug nuts and what price would i be looking at ?!?!?!

thanks guys

Don't you have the lug nuts that came with your car?

well the set of XXR's dont come with lug nuts
i currently have lugs nuts on my rota gravels am i able to use them for the XXR's or do i need lug nuts that are meant for XXR 527's?
thanks in advance

libz05 wrote:well the set of XXR's dont come with lug nuts
i currently have lugs nuts on my rota gravels am i able to use them for the XXR's or do i need lug nuts that are meant for XXR 527's?
thanks in advance

Did the lug nuts come with your rota gravels? Or are they your original lug nuts. From what I know you don't get lug nuts when you purchase rims, but I could be mistaken.

If you want matching lug nuts and want ones that have a lock nut, the ones that cruisn posted in the group buy thread will be fine and you can get the colour you want. Even without a group buy they are a decent price.

yes the lug nuts which are the rotas came with rota lugs

libz05 wrote:yes the lug nuts which are the rotas came with rota lugs

I see. So what happened to your original lug nuts?

Either way just buy some McGard lug nuts!

Only thing to check is what sort of lug nuts the xxrs require, as far as I know there's two types, the flat-bottomed ones which are stock Subaru ones, and the other ones used on a lot of aftermarket wheels are what's called (I think) tuner or conical lug nuts, where the end is tapered and the wheel itself has an identical shape for it to fit into. Its like countersunk screws, that's the best way I can explain it, can't find a link as I'm on my phone. So just find out what the xxrs need and you'll be fine. Oh and make sure you have right pitch sizing if you order some, M12x1.25 is the right one from memory

http://www.lugshack.com/category_s/48.htm

Take your pick. There are a few colors of mcgards.

Subaru has a 60 degree tapered seat which is pretty much aftermarket standard also ie RAYS, WORK, BBS, etc.

Id be very suprised id the XXR's were any different.

I may be anal and fit WORK nuts to match my new WORK's and you can buy the McGards.....

Black, all spline drive, no locking nuts. A spline drive is a lock nut anyway really..... Pretty much as new and unmarked.

$100 to your door.

cruisn wrote:Subaru has a 60 degree tapered seat which is pretty much aftermarket standard also ie RAYS, WORK, BBS, etc.

Id be very suprised id the XXR's were any different.

I may be anal and fit WORK nuts to match my new WORK's and you can buy the McGards.....

Black, all spline drive, no locking nuts. A spline drive is a lock nut anyway really..... Pretty much as new and unmarked.

$100 to your door.

is this still available??
if so ill take em!!!
they will fit rota gravels right! i need new ones as my current wheel nuts are old n rusting
any pics?

Sorry, snapped up a few weeks ago.

Info pm'd re nuts.