club.liberty.asn.au

WRX 4 pots.

murf, you already have 294mm brakes, not worth the cash to upgrade to 4-pots.

but if you were going to upgrade to some 316mm 3.0 Lib or GTB brakes, i have a set of brand new factory rotors....cheap!
just find some calipers (Kris at Rising Sun Subaru should be able to hook you up)

i only have dual/single piston calipers? apperently a wrx set is a cheapper upgrade with out spending heaps , im about to drop in some DBA 4000's and some project mu bspec padz i dont reckon i could get bigger rotors in my wheels

4pots won't fit under bbs B4 wheels

hamish_023 wrote:4pots won't fit under bbs B4 wheels

i dont have the BBS's mate

hence the reason im chasing some 4 pots, cuz the standard brakes are on show and look pox

Nice looking B4! If your not already keep an eye on Rexnet they pop up all the time.

Murfb4 wrote:i only have dual/single piston calipers?

Two-pots with the same diameter rotor
you will still get the same braking torque applied.
4-pots just put more even pressure on the pads.

i'm unsure if 4pots even fit under those rims either

Robbks wrote:

Murfb4 wrote:i only have dual/single piston calipers?

Two-pots with the same diameter rotor
you will still get the same braking torque applied.
4-pots just put more even pressure on the pads.

i'm unsure if 4pots even fit under those rims either

i might see if i can borrow grugs and try:) since he dont need them to stop any more

Those Gen4 rims clear 4 pots.

Robbks wrote:murf, you already have 294mm brakes, not worth the cash to upgrade to 4-pots.

but if you were going to upgrade to some 316mm 3.0 Lib or GTB brakes, i have a set of brand new factory rotors....cheap!
just find some calipers (Kris at Rising Sun Subaru should be able to hook you up)

i got a set of dba 4000's for 250 today