TWIN EXHAUST WANTED [FOUND]

[jacksback]

Hi, i have an 2L 05 liberty and have the crappy single exhaust and want to upgrade to the double, anyone out there have a set of full exhausts and maybe the plastic mold for the bumper that would be great. PM me if you do.

Cheers,
Jack

[wassell2381]

pm sent

[LGT-05T]

hey jack, just to let you know that if you are referring to the black plastic piece at the bottom of the bar, that it is not a seperate piece its actually appart of the whole bar. it is a complete unit. if you are going to do this mod you will either have to 1- get a whole new bar. 2-cut yours out as neat as you can or 3-if you cut it out, you can actually buy a exhaust surround for both sides and put them on which id probably do in your case to make it look neat. an example of this is on clarence's car aka TANGCLA.
cheers steve

[smythie]

On the pre-facelift cars, there is a removable segment on the driver's side of the rear bumper. I'm not sure but with that there, I would have thought the single outlet would be on the passenger side with a blank plate on the driver's side

[adam]

jack, that little pop in piece is like $12 from subaru.

[jacksback]

Yeah I noticed the pop out plastic on the drivers side that can fit another exhaust, i will need to get plastic surround from subaru tomorrow. Cheers all for your help.

[jacksback]

bought the plastic pop in for the drivers side exhaust on the bar, was only $15 from subaru, saves me getting a whole bar, cheers.

[jacksback]

picked up a set of exhausts and Y section of an 05 gt so all set, cheers all

[adam]

picked up a set of exhausts and Y section of an 05 gt so all set, cheers all

nice work jack,
just remember that the section forward of the first muffler is slightly shorter than the N/A exhaust (~180mm from memory) so you'll need to get that replaced.
shouldn't cost more than $$80-$100 bucks. make sure and post some pics when you're done.