just blew up my hydrologic hose on my 98 liberty rx 2.5n/a
any one in the sydney area with a new or used hose please ring me! 0425282661
its the black hose that clamps onto the steel hose and goes to the hydrologic valve thing that engages/disengages the clutch
PLEASE HELP!!!!!
Australian Liberty Owners Club
URGENT!!!
4 posts
• Page 1 of 1
URGENT!!!
by aaron.blake » Fri Feb 19, 2010 4:17 pm
- aaron.blake
- Posts: 11
- Joined: Mon Jan 18, 2010 9:08 pm
- Location: beecroft NSW
- Car: 1998 Subaru Liberty RX BILSTIEN
Re: URGENT!!!
by GTB Liberty » Fri Feb 19, 2010 5:28 pm
Spelling - Hydraulic
MY08 Liberty GT Spec B Manual SEDAN | TEAM White | Verso tuned @ ASG 240 Hp & 372 Nm hub dyno| STi | BBK M turbo | GriMspeed | Brembo | Valentine V1 | ECUdatascan | PROVA | HKS | Zero Sports | Phat Performance Parts | ACME | Whiteline | Enkei | Dixcel | Cusco
" . . . and on the 8th day God made Subaru . . . on the 9th supposedly the V8 . . . and on the 10th turbo lag so the V8s would think they had a chance "
" . . . and on the 8th day God made Subaru . . . on the 9th supposedly the V8 . . . and on the 10th turbo lag so the V8s would think they had a chance "
-
GTB Liberty - Posts: 905
- Joined: Wed Jun 10, 2009 11:06 am
- Location: Perth, WA
- Car: MY08 Liberty GT Spec B
- Profile URL: viewtopic.php?t=5714
Re: URGENT!!!
by teK-- » Fri Feb 19, 2010 5:33 pm
You should go to PIRTEK or ENZED there are many service centers in every state (they will be open tomorrow morning). Take the busted hose with you and they will be able to make a brand new custom one that's better than the original. Probably looking at around $50 to $100 depending on types of end fittings needed.
MY04 2.5i Safety 5MT Sedan "Project Locomotive"
..: JDM Subaru-AVO-Whiteline-Bilstein-Swift Springs-Cusco-Rallitek-GT Brakes-Remsa-K4RT30Y-Blitz-Philips-Défi-STI-Sabelt-Redline-Alpine-Polk Audio-Kenwood-Dynamat :..
..: JDM Subaru-AVO-Whiteline-Bilstein-Swift Springs-Cusco-Rallitek-GT Brakes-Remsa-K4RT30Y-Blitz-Philips-Défi-STI-Sabelt-Redline-Alpine-Polk Audio-Kenwood-Dynamat :..
-
teK-- - -stickered-
- Posts: 4064
- Joined: Thu Jun 11, 2009 5:02 pm
- Location: Melbourne
Re: URGENT!!!
by nytrojen » Fri Feb 19, 2010 6:05 pm
teK-- wrote:You should go to PIRTEK or ENZED there are many service centers in every state (they will be open tomorrow morning). Take the busted hose with you and they will be able to make a brand new custom one that's better than the original. Probably looking at around $50 to $100 depending on types of end fittings needed.
+1 Those guys are really helpful and (most of them) know their $hit
- nytrojen
- -stickered-
- Posts: 1572
- Joined: Tue Apr 14, 2009 6:14 pm
4 posts
• Page 1 of 1
Who is online
Users browsing this forum: No registered users and 4 guests