Endlinks - Group A

by **overl0ad** » Mon Apr 07, 2008 3:35 pm

The package I’ve been waiting for has finally turned up.

So I’ve got 3 sets of these. As in to do 3 complete GenIVs.

Not sure if they will fit the GenIIIs...

Anyways.

Manufacturer’s site is at www.groupa.ca

Will work with 2.0i, 2.5i and 2.0GT and 2.5GT. no idea about the 3.0tho...

Goes for $150 an end, $300 for the set.

Free post in Australia.

=)

Also have pitch mount replacements. Will post these in a separate thread.

by **AndrewCowley** » Mon Apr 07, 2008 6:05 pm

Any indication as to whether these would be noiser than stock? With a 22mm Whiteline RSB and FSB and the stock endlinks I get the odd 'klunk' here and there. Would these endlinks be better or worse?

by **overl0ad** » Mon Apr 07, 2008 6:40 pm

NVH will increase.

had these in my car. i think was worth it. car was much flatter round bends once again then just the sway bars.

the noise you are currently getting is prob coming from either dry busings or something not tight.

same thing happened to me. *sheepish look*

by **CheesyMong** » Tue Apr 08, 2008 1:36 pm

overl0ad wrote:NVH will increase.

had these in my car. i think was worth it. car was much flatter round bends once again then just the sway bars.

the noise you are currently getting is prob coming from either dry busings or something not tight.

same thing happened to me. *sheepish look*

I generally only get a clunk when I hit a bump with the whiteline sways on and king springs I'm guessing that is just a normal hitting a bump noise, normal driving is fine

by **tangcla** » Tue Apr 08, 2008 2:44 pm

I had a clunk with my rear sway bars as well, until I realised that it was due to the endlink bolt not being on tight enough... :oops:

by **CheesyMong** » Tue Apr 08, 2008 4:24 pm

tangcla wrote:I had a clunk with my rear sway bars as well, until I realised that it was due to the endlink bolt not being on tight enough...

Was that in general driving or only when you hit a bump?

by **suff** » Tue Apr 08, 2008 5:24 pm

This is a kit for Front and Rear right?

Any chance I can have a Pic please?

Cheers

Chris

by **overl0ad** » Tue Apr 08, 2008 6:39 pm

photos as requested.

sorry about the image quality. only have an old digital camera...

by **tangcla** » Tue Apr 08, 2008 6:46 pm

CheesyMong wrote:Was that in general driving or only when you hit a bump?

It was some bumps more than others...,

by **overl0ad** » Sat Apr 26, 2008 5:50 pm

bumpage!

by **overl0ad** » Fri May 23, 2008 7:58 pm

more photos, again thanks to tangcla

by **markii** » Fri May 23, 2008 8:03 pm

tangcla wrote:I had a clunk with my rear sway bars as well, until I realised that it was due to the endlink bolt not being on tight enough...

I had a clunk for 1 month... Everytime i turned a sharp corner IM LIKE WTF IS THAT!!

Whilst i was cleaning out my glovebox, i found a 2 dollar coin.. i was like NO WAY.. got so angry. i threw it in frustration.. then i went and picked it up!

noise = no more :oops:

by **tangcla** » Fri May 23, 2008 8:54 pm

markii wrote:I had a clunk for 1 month... Everytime i turned a sharp corner IM LIKE WTF IS THAT!!

Whilst i was cleaning out my glovebox, i found a 2 dollar coin.. i was like NO WAY.. got so angry. i threw it in frustration.. then i went and picked it up!

noise = no more

LOL
I think your situation is slightly different to what I had :lol:

by **overl0ad** » Mon Nov 24, 2008 8:26 pm

bumpage!

with the AU dollar now so low, these are a steal!

by **Kosti** » Wed Nov 26, 2008 8:56 pm

Do they fit GEN III

Endlinks - Group A

Endlinks - Group A

Who is online