Hotwire wrote:Is there a cut-off date for ordering these?
Just until Phat GT gets bored of ordering. Otherwise it's open ended. However keep in mind Tein raises their prices by like 7-9% every year regardless, so you'll be paying more each year you wait.
Woodduck wrote: these work with the exsisting 3.0R spec B setup yeah? Just change the spring...
Certainly! Just be sure to specify that when you order.
wixy wrote:I just want to clarify that if I swapped these for the stock springs in an 05 3.0r-b, ride comfort and handling would not be reduced?
Realistically, as Woodduck mentioned, you have to expect a bit of reduced ride comfort when reducing the suspension travel. However the ride will feel more settled and tamed. No more bouncing when you go over a hump. Plus you'll tackle those corners with a lot more confidence and control.
chugga15 wrote:just getting a bit sick of feeling like my front suspension is going to snap every time i go round a corner!!! need something that helps the stability a little.
How many km's on your Lib? It might just be that your struts are on their way out. But the only reason why one needs to specify Bilstein or not is because the Bilsteins raise the fronts by about 5-10mm. So the springs need to be adjusted to accommodate that difference.
But there have been quite a few people who fitted the S.Techs on non-Bilsteins and the ride is still comfortable and performance is not that far off.
senator wrote:dam you jim..........what to choose........mmmmmmmmm
Although I'd like to say you are free to pick whatever option that best suits you, I'm gonna have to be honest and say I would lose any little respect I had left for you if you didn't go coilovers.