DIXCEL ROTORS and BRAKE PADS

DIXCEL ROTORS and BRAKE PADS

Postby T-REXX » Wed Oct 15, 2008 3:08 pm

Hi guys

PRO-Speed Racing is now EXCLUSIVE DISTRIBUTOR for DIXCEL ROTORS and BRAKING PRODUCTs

DIXCEL all made in JAPAN and are of the highest quality. Used by many RACE Teams around the world

I will have stock of all Libertys, WRX, STi, EVO here in 3 t o4 weeks. I have over 50 sets coming in

All Prices incl GST and Delivery Australia Wide
All Prices are PER PAIR (of 2)
All Front Kits sold Rears gets 10% off

Brake Fluid Dot 4
Image
# lexible nozzle (attached )
A flexible nozzle is introduced to make pouring directly into the reservoir tank easier, solved the corrosion problem caused by the fluid drop on the car chassis and body. There is now definitely no need to transfer anything to another container.
# Level indicator
Level indicator on the sidewall of the fluid bottle shows the remainder.
DOT 4 1Litre $24.95




http://www.dixcel.co.jp/en/


Image

Plain and Slotted Rotors

ImageImage
PD Type NON SLOTTED
Fronts 4 pot $315
Rear 2 Pot $279
Front Brembo $465
Rear Brembo $410

SD Type SLOTTED
Front 4 Pot $390
Rear 2 Pot $375
Front Brembo $555
Rear Brembo $455


New evaluation standards

* Wide range coverage from all Japanese vehicle to European and American cars, also from light passenger cars to 4x4 vehicles
* Succeeded to limit the squeal and vibration by setting the product’s accuracy at a high level for parallelism and DTV
* Considering a better compatibility with various brake pad material, the high grade reputed grey cast iron has been adopted. In addition, compounds of various additives are employed such as carbon, silicon, etc, to improve strength, heat resistance and resistance to cracking.

* The anti-rust treatment is for reducing the chance of rusting and so does not completely prevent rusting. Complete anti-rust is not possible as it is cast iron product, and so is not claimable. We would appreciate your understanding concerning this matter.
_________________________________________________________________

Heat Treated Rotors Plain and Slotted

ImageImage
HD Type NON SLOTTED
Rear 2 Pot $420
Rear Brembo $540

HS Type SLOTTED
Rear 2 Pot $540
Rear Brembo $660


* For increased high performance use with Z type or R01 type pads.
* The initial brake response will be improved.
* It is recommended to the professional racing drivers who require more braking stability.
* HD type will be substituted with FCR type when available, please understand that FCR type is of a higher grade than HD. FCR (FP) type is supplied automatically with no extra charge.

* Although each one of the FCR(FP&FS) rotor, the heated disk rotor(HD) and heated slot disk rotor(HS) has had heat treatment, please take a bedding-in procedure. Sudden heating or cooling by braking may cause cracks, tensions and judder.
* The appearance of anti-rust coating and heat treatment varies on individual product, but it does not affect the quality of products.
________________________________________________________________
FCR Rotors Plain, Slotted and 2 Piece
ImageImageImage
FCR FP Type NON SLOTTED
Front 4 Pot Front $465
Front Brembo $660

FCR FS Type SLOTTED
Front 4 Pot $590
Front Brembo $790

FCR 2 Piece NOT INCL HATS
Front Only from $795

* Wide range lineup from normal size to 2 piece type.
* The initial bite improves with reasonable surface hardness. Outstanding compatibility with various pads material.
* Anti rust coating by special heat resistance paint

* There are two types of FCR series, a slotted type "FS" and a non slot type "FP."
* 2 pieces type rotors are the repair replacement parts for vehicles already equipped with the rotor of applicable size.  (for size refer to specs in the table below)
Please note that the bell housing, and bolts/nuts for attachment, are not available.
* When FP type fitted on front brakes, HD or PD is recommended for rear application, and if FS is equipped for front, then HS or SD is recommended for rear.
FCR series (FP and FS type) substitutes HD and HS type when available. HD is substituted by FP and HS is substituted by FS when FCR type is available in range.
* When an order of HS or HD type where FCR is available in range, FS or FP is supplied automatically with no extra charge.

Please understand that FCR is of a higher grade than HD or HS.
_____________________________________________________________________


DUAL ACTIVE VENTILATION ROTOR
Image
DAV PD Type NON SLOTTED
Front 4 Pot $399
DAV SD Type SLOTTED
Front 4 Pot $449
DAV FS Type SLOTTED
Front 4 Pot $599

Braking advantage, the innovative coo;ing methed brings about.
* Taking cooling wind from both inner side and outer side of rotor improves cooling capability significantly.
* Strengthen the resistance of rotor strain and distortion against heat damage and Judder proof performance also improved.
* Encourage to lead 100% potential performance of brake pads owing to quick and efficient cooling.
* All the brake components last longer.
Blouch RBK
Bullet HD
COBB Tuning
ZeroSports

Image
T-REXX
 
Posts: 553
Joined: Sat Dec 22, 2007 7:57 pm
Location: Central Coast

Postby T-REXX » Wed Dec 10, 2008 10:40 pm

guys

this shippment has landed and in stock ready to go

details for what models for the Libs is on my site

Troy
Blouch RBK
Bullet HD
COBB Tuning
ZeroSports

Image
T-REXX
 
Posts: 553
Joined: Sat Dec 22, 2007 7:57 pm
Location: Central Coast

Postby Arith » Wed Dec 10, 2008 11:14 pm

Mmm, FCR Slotted. I wouldn't mind those for my fronts.

[ Former Liberty ... Slightly Modified -> Click
here for modifications & profile ]
User avatar
Arith
-stickered-
 
Posts: 6111
Joined: Mon Oct 08, 2007 2:05 am
Location: Sydney (Wes-Sieed!)
Car: MY11 Volvo S60 T6
Real name: Jim

Postby T-REXX » Thu Dec 11, 2008 9:29 am

im getting them put on my car tommorrow night:D
Blouch RBK
Bullet HD
COBB Tuning
ZeroSports

Image
T-REXX
 
Posts: 553
Joined: Sat Dec 22, 2007 7:57 pm
Location: Central Coast

Postby senator » Mon Dec 22, 2008 2:49 pm

troy can you get pads?

if so how much and which type?

cheers
Not a soobi anymore, but still slightly dirty
"TEAM TONY"
User avatar
senator
 
Posts: 3217
Joined: Sun Apr 15, 2007 8:53 pm
Location: SYDNEY

Postby T-REXX » Mon Dec 22, 2008 3:51 pm

Hi mate

Yes i have the Type M pads in stock for the Brembos:)

These are a great street pad

Troy
Blouch RBK
Bullet HD
COBB Tuning
ZeroSports

Image
T-REXX
 
Posts: 553
Joined: Sat Dec 22, 2007 7:57 pm
Location: Central Coast

Postby T-REXX » Wed Jan 21, 2009 8:35 pm

More of these are now in stock

Troy
Blouch RBK
Bullet HD
COBB Tuning
ZeroSports

Image
T-REXX
 
Posts: 553
Joined: Sat Dec 22, 2007 7:57 pm
Location: Central Coast

Postby T-REXX » Fri May 29, 2009 7:46 pm

i have specials running on DIXCEL products for 4 weeks.. Been running it on REXNET for 1 weeks and prices are mad :)

PM me for details

TRoy
Blouch RBK
Bullet HD
COBB Tuning
ZeroSports

Image
T-REXX
 
Posts: 553
Joined: Sat Dec 22, 2007 7:57 pm
Location: Central Coast

Postby T-REXX » Mon Jun 01, 2009 4:31 pm

Guys

I have some pads in stock ready to go

Part Numbers i have are

M-361072 Fr. M
M-361074 Fr. M
M-361077 Fr. M BREMBO
M-361110 Fr. M

All Fronts
All Type M.

Below is the table for you to check and see if they will be suitable for your car.

http://www.dixcel.co.jp/list/pad_list/jp_pad.htm

SPECIAL PRICE:

[b]$239 delivered[/b]
Blouch RBK
Bullet HD
COBB Tuning
ZeroSports

Image
T-REXX
 
Posts: 553
Joined: Sat Dec 22, 2007 7:57 pm
Location: Central Coast

Postby ultrablue » Mon Jun 01, 2009 4:47 pm

that list is for toyota but i found the subaru with trial and error


M-361072 Fr. M to fit be5
M-361074 Fr. M to fit be5
M-361077 Fr. M BREMBO
M-361110 Fr. M to fit 2.0r and 2.0i
Image
User avatar
ultrablue
 
Posts: 424
Joined: Mon Jan 14, 2008 11:54 am
Location: Sydney
Car: 2010 ssv se


Return to PRO-Speed Racing

Who is online

Users browsing this forum: No registered users and 1 guest

cron