Page 1 of 2

Perth-WRX Demolition Dyno Day

PostPosted: Tue Aug 25, 2009 10:59 am
by GTSPECB STI
If your not doing anything this Sat morning then stop in to Maximum Motorsport for a look at the Perth-WRX demolition dyno day. Some serious HP Subaru's plus a few Libs like Scary and I doing power runs. BBQ and chance to shoot the breeze. Spectators are more than welcome.

Starts: 8:30am Sharp
Date: Saturday - 29th August 2009
Venue: Maximum Motorsport - 66 Westchester Rd Malaga
Mainline Dynolog Dyno (AWD 1000) used

Re: Perth-WRX Demolition Dyno Day

PostPosted: Wed Aug 26, 2009 1:46 pm
by GTSPECB STI
Couple of spots still available for Sat morning if anyone in Perth is interested. Couple of power runs for $50.

Re: Perth-WRX Demolition Dyno Day

PostPosted: Wed Aug 26, 2009 3:41 pm
by TorpedoCreative
Love to come as a spectator but have family commitments that morning DOH! :cry:

Re: Perth-WRX Demolition Dyno Day

PostPosted: Wed Aug 26, 2009 3:44 pm
by GTSPECB STI
TorpedoCreative wrote:Love to come as a spectator but have family commitments that morning DOH! :cry:

we start at 8:30 and go til 2:30 James..could easily fit you in around lunch time :D

Re: Perth-WRX Demolition Dyno Day

PostPosted: Wed Aug 26, 2009 5:44 pm
by suff
Or you could just bring the family!

Re: Perth-WRX Demolition Dyno Day

PostPosted: Wed Aug 26, 2009 5:59 pm
by GTSPECB STI
Bring the E90 for a power run Chris !!!!!!!!

Re: Perth-WRX Demolition Dyno Day

PostPosted: Thu Aug 27, 2009 12:41 pm
by suff
would love to.. but its not in my hands yet :(

bring on next week!

On that note.. do any of you guys have an accurate method of logging 0-100 times?.. I am getting conflicting reports on what the car should be capable of, and want to do a base power run, qtr mile & 0-100-0 run before I chip it..

I WILL NOT MODIFY THIS CAR - must repeat this 100 times a day

Re: Perth-WRX Demolition Dyno Day

PostPosted: Thu Aug 27, 2009 12:47 pm
by GTSPECB STI
LOL Chris you know you will be doing the ecu flash on it so why do the breathing and exhaust mods at the same time...you know will its a given!!!

Re: Perth-WRX Demolition Dyno Day

PostPosted: Thu Aug 27, 2009 1:03 pm
by suff
Already looking at brake rotors for the "w@nk factor"

Re: Perth-WRX Demolition Dyno Day

PostPosted: Thu Aug 27, 2009 3:07 pm
by smythie
It can't be all that hard to wind up the boost on those snails either. 220kw from a twin turbo 3.0 6 is nothing. So much potential there

Re: Perth-WRX Demolition Dyno Day

PostPosted: Thu Aug 27, 2009 3:10 pm
by suff
Its getting a Vishnu (Excede) Chip for my birthday.. that lifts peak power to ~270kw and ~445nm at the fly..

The plan is to leave it at that

Re: Perth-WRX Demolition Dyno Day

PostPosted: Thu Aug 27, 2009 3:17 pm
by smythie
That'd do me for quite a while I reckon. :mrgreen:

Re: Perth-WRX Demolition Dyno Day

PostPosted: Thu Aug 27, 2009 4:06 pm
by GTSPECB STI
suff wrote:Its getting a Vishnu (Excede) Chip for my birthday.. that lifts peak power to ~270kw and ~445nm at the fly..

The plan is to leave it at that


Chris when I lived in Reno NV I visited San Fran often and the Vishnu shop several times...that could be the best birthday present you ever got mate.

Re: Perth-WRX Demolition Dyno Day

PostPosted: Thu Aug 27, 2009 9:13 pm
by suff
Have you had any tuning work done by Vishnu Dave?

Re: Perth-WRX Demolition Dyno Day

PostPosted: Fri Aug 28, 2009 9:44 am
by GTSPECB STI
suff wrote:Have you had any tuning work done by Vishnu Dave?


Nope couldn't afford him but I did have two mates who used him and the results were first class :mrgreen: