EOI: Group paintless dent removal day

[tangcla]

Anyone interested in getting their car done?
No idea of cost but I'll try to find out.

1. tangcla

[Ric]

I have small one in one door I'd like fixed

1. tangcla
2. Ric

Note, use the QUOTE button on this post and then edit it to add your name, so as to preserve the list format.
It should look like this after you edit it:

Code: Select all

[list=1]
[*]tangcla
[*]Ric[/list]

[Hotwire]

As an Idea on price, generally they charge around $100 for the fist dent, $50 for each dent after.
Split the first $50 by how many people, so with 5 should save upwards of $40 each

[Digital]

dont flame me but does a 'dent' include two small scratches some douche left in my bumper? (paint gone can see the bumper)

[Ric]

dont flame me but does a 'dent' include two small scratches some douche left in my bumper? (paint gone can see the bumper)

"Paintless dent removal" means they can pull out a dent without redoing the paint, so it's pointless if the paint is cracked/scratched/chipped.

[tangcla]

Any suggestions as to who to go with?

[tangcla]

Was recommended Vincent from Mr. Dent (0418538117) and he told me he charges $60-70 per panel, regardless of how many dents on that panel. He's done a few Ferraris that I know of, so I'm sure he's good if everyone's happy with that we will just go with him; but definitely open to suggestions.

We will hold it on a Saturday morning (date TBA), in Heidelberg.

[JimmyH]

Hmmm I have a nice one on my back door from the previous owner... but I work Saturday mornings... Ill have to be put down as a maybe

[LibJam]

afaik mine is still a dent virgin. Got a couple of scratches and stone chips though

Will

[Ric]

Is anything happening with this, or don't we have the numbers?

[Woodduck]

Grrr! I really would love to get this done! Shame is so far to melbs/so expensive for accom! I have 3 doors that have a couple of dents on em....and I got quoted $400+ and no guarantee that they'll come out! They are not big dints, so i dont see why its so friggin expensive!!!!

[tangcla]

Is anything happening with this, or don't we have the numbers?

Will happen, just waiting on someone who apparently has another lead.

[teK--]

A mate of mine John works for himself and he's based out of Clayton. His business is: http://www.pdrtek.com.au. It's worthwhile asking him?

[LibJam]

Grrr! I really would love to get this done! Shame is so far to melbs/so expensive for accom! I have 3 doors that have a couple of dents on em....and I got quoted $400+ and no guarantee that they'll come out! They are not big dints, so i dont see why its so friggin expensive!!!!

I actually asked the panel guys I went to see after the bingle for insurance quotes about doing a chip session, and apparently if it's in the middle of a panel, they just need to do the panel (paint blending), but if it's at the edge of a panel they need to do that panel and the adjacent to blend properly. not sure if it was guff or not but the figures quoted to get a chip fixed on mine were about the $300-$400 mark (per panel).

Will

[MH3.0R]

Guys,

I will be interested as I have recently acquired a series of 3 small dents in the driver's side rear passenger door.

I have sent enquiry emails to two of the contacts posted and waiting for feedback. Will keep you posted on their response (if any).

Kind Regards,

Mark.