Rexnet dyno day 29/06/13

[C-Shell]

Justin's Run

[brainy]

Justin's Run

http://youtu.be/vngSQmMyYS0

great photo's C-Shell, always good to catch up!

Did a good job with that vid as well. Did you happen to get the other libs recorded too?

[gtsti7]

Thanks for the nice pix of my ride

[bigBADbenny]

RESULTS HERE!
Quoting Danny>>>
Posted Today, 10:35 AM
Ok, So here are results from the list I had on the day.
It was a tough dyno said by many people, including RTR customers that came in! More of a reality

Rex77 - 178KW
BPI - 191.9KW
RXBOI - 175.5KW
Stevo716 - 174KW
Blacked - 154.4KW
HYPA13 - 159.1KW
l319h's Friend - 182.9KW
Vinzhonz - 198.5KW
l319h - 246.1KW - 2nd
Joffa711 - 152.9KW
Dannyb5 - 234.6KW - 3rd
Shadow27 - 219.6KW
Charlierexx - 206KW
MiG91 - 195.9KW
RIP - 198.7KW
Alexnorinh - 269.3KW - 1st
SUSREX - 163KW
MY12HATCH - 177.7KW
Smotan - 167.3KW
GTfoz - 193.7KW

Now for the Lib boys!

BigBadBenny - 167.8KW
GiantB - 278.3KW - Biggest power on the day!
JayDeCe - 251.4KW
BSPEC - 220.3KW

As I said, Amazing day! Everyones car ran well, No issues at all! Feel free to post up your graphs!

<<<End Quote

[C-Shell]

GB's Run



Owen's Run



How do you embed the youtube videos properly? I remember reading someones post on how to do it a while ago, but I have forgotten

Thanks for the nice pix of my ride

No worries mate. I think I have enabled to full resolution photo to be saved to your hard drive through flickr. So feel free to save them.

Justin's Run

http://youtu.be/vngSQmMyYS0

great photo's C-Shell, always good to catch up!

Did a good job with that vid as well. Did you happen to get the other libs recorded too?

Was good to see everyone, and put a couple screen names to faces. My upload speeds are pretty average so the last two runs have been uploading all arvo

Shattered i couldn't make it had to work but looked like a fun day!

Was a good day man! I had wondered where you'd got to haha

[Kekotic]

GB's Run

http://youtu.be/_ao0NGydfHU

How do you embed the youtube videos properly? I remember reading someones post on how to do it a while ago, but I have forgotten

What you should be putting
[youtube1 ]http://www.youtube.com/watch?v=_ao0NGydfHU[ /youtube1]

not shortened links like this [youtube1 ]http://youtu.be/_ao0NGydfHU[ /youtube1]

Also no https:// (only http://), and no &feature tagged on to the end of the link.

[C-Shell]

GB's Run

http://youtu.be/_ao0NGydfHU

How do you embed the youtube videos properly? I remember reading someones post on how to do it a while ago, but I have forgotten

What you should be putting
[youtube1 ]http://www.youtube.com/watch?v=_ao0NGydfHU[ /youtube1]

not shortened links like this [youtube1 ]http://youtu.be/_ao0NGydfHU[ /youtube1]

Also no https:// (only http://), and no &feature tagged on to the end of the link.

Thanks mate, I'm pretty sure it was your post I read somewhere else. I had a quick search for it but couldn't find it. I'll fix them up now

[Ric]

... or, just use the "youtube2" bbcode, which only needs the video ID.
In this case, it's the red bit
http://youtu.be/_ao0NGydfHU
So

Code: Select all

[youtube2]_ao0NGydfHU[/youtube2]

gives

[bpi]

Hey guy's, was a great day. Some of those Liberty's put down some REAL serious numbers. Was good to meet 'bigBadbenny', love those polished Brembo's . Really was a well run event, a real credit to Danny & Dan from RTR.
Cheers Ben

[bigBADbenny]

Hey cheers!
Very much looking forward to the next Rexnet Dyno Day which might even be later this year

[KiDo_Tuning]

It was a tough dyno said by many people, including RTR customers that came in! More of a reality

<<<End Quote

Yep, I think someone has said that before

[bigBADbenny]

Not my exact quote but anyhoo...

Matt how do you rate the RTR afr probe as regards accuracy?

[KiDo_Tuning]

Not my exact quote but anyhoo...

Matt how do you rate the RTR afr probe as regards accuracy?

Sorry on my phone so it was a simple cut to quote with a cracked screen

As always, wideband up the ass is always affected by catalytic converter not to mention exhaust hasket leaks and even WATER aka steam in the mufflers etc. Dump pipe AFRs trend for good results but is dependant on exhaust gas temps for accuracy.
Log Front O2 sensor Heater Resistance while logging wideband AFRs and compare to the dyno graph

[bigBADbenny]

Nice one: next time I'm out there ill do that!
I'll need another visit after I get my tune tweaked and the aem failsafe configured.

[<GB>]

mine did better on that dyno than on chasers but the temp of the day was different and that makes a huge difference to mine