thanks ric and everyone who came for a great morning!
my car is dirty again now.. ha ha. can't wait for next one!
AB501UT!0N wrote:PinkK wrote:Sorry guys I'm going to have to miss this one as well Got some issues with ITA that are driving me insane! So gotta get them sorted before I head out on a day of driving.
That is no good and I hope the damage is not bad!
jakey wrote:.... goshgollywingwong
Jack_Keaka wrote:the process of chris getting his parts as follows:
MH3.0R wrote:June long weekend is looking good!
MH3.0R wrote:Looks like you all had fun. Hopefully, will join you on the next one.
June long weekend is looking good!
naccs wrote:Great pics Chris!
Thanks to Ric for organising such a great drive!
Looking forward to the next one which hopefully isn't too far away.
MH3.0R wrote:Looks like you all had fun. Hopefully, will join you on the next one.
June long weekend is looking good!
jakey wrote:.... goshgollywingwong
Jack_Keaka wrote:the process of chris getting his parts as follows:
Ric wrote:C-Shell wrote:215/45/17 Diameter = 625.3 mm
215/50/16 Diameter = 621.4 mm
That's only a 0.6% difference, so not a lot.
I have a set of wheels with 215/45/17 RE050As you could borrow for the day. The tread on them is still (just) legal .
C-Shell wrote:Ric wrote:C-Shell wrote:215/45/17 Diameter = 625.3 mm
215/50/16 Diameter = 621.4 mm
That's only a 0.6% difference, so not a lot.
I have a set of wheels with 215/45/17 RE050As you could borrow for the day. The tread on them is still (just) legal .
Sorry I didn't get back to you Ric, got all emotional because I couldn't go and a few mishaps in the week leading up
Ended up having a few poo moments in the last two weeks.
Old rims ended up cracking when re rolled. Had to find a new set. Found some B4 BBS rims for a decent price in good condition. Then spent a week organising with tyre shop to get tyres i just bought put back onto them for free (they fitted without telling me the servers of the buckles) Power steering started playing up (sounds like it's running dry when under decent load and near full lock. It's also always getting air in it, no matter how much I bleed) Managed to mount a rock/ boulder leaving the driveway of where I park my car in the morning, chipped the s**t of the front bar and scratched up swaybar and bent some things. Did an ECU error check and came up with Air Intake Temperature sensor, reset it today to see if it logs again, or just an old error.
Was pumped to get out and meet some more new faces at this meet, but next one will have to surfice haha Good to see everyone had a good day and there weren't any major dramas!
jakey wrote:.... goshgollywingwong
Jack_Keaka wrote:the process of chris getting his parts as follows:
Users browsing this forum: No registered users and 7 guests