Exhaust?

Here's where you can ask for suggestions what MODs you should consider. Let the experts tell you what you should add.

Exhaust?

Postby CappZ » Fri Aug 21, 2009 12:32 pm

I have finally decided to get a new muffler for my 2.5i and was thinking either:
- Cannons with 4" tips
- Mufflers with 4" tips

Either way, I get the 4"tips I want, but I don't know whether to get the muffler or cannon. I like how the stock muffler can be seen from behind the car, and you can see how the muffler is not just where the hole in the bumper is but moving towards the center of the car as well. If I get cannons then I lose this and I don't mind it either. I'm thinking the mufflers wont be seen as much as the stock one's anyways as when they install it the move it up a bit higher so that the tip sits nicely with the lines of the bumper.

I want a louder sounding exhaust, the cannons are nothing cheap like from autobarn, so no silencers, so they are going to be quite loud..I don't want something overly loud..can someone with cannons tell me what it's like?

Does anyone have any photos of a liberty with cannons (preferably with 4"tips) and mufflers (also preferably with 4"tips)?

Which should I go for?
Any help/suggestions are welcomed.
Image
http://www.lookatyourface.com

MY04 2.5i - 6000k HIDs, 18" RJR Vouge, Kenwood KDC-BT7539U with custom install, 12" Vibe Slick S12, 420w Clarion amp, all white lighting, K&N panel, 4" cannons, lowered.
User avatar
CappZ
 
Posts: 384
Joined: Fri Jun 05, 2009 11:24 pm
Location: Sydney
Car: MY04 2.5i
Real name: Alan

Re: Exhaust?

Postby swingn » Fri Aug 21, 2009 3:59 pm

I have Apexi N1 cannons on my GT Wagon... Sounds good & it's not loud in the cabin at all (Unless you've really got your foot into it ;) )

I think it comes down to what look you like the best... But considering your wanting a 4 inch tip, I'd suggest the cannons :D

Not the best pic of my car, but you can see what the cannons look like from the side :D

Image
User avatar
swingn
-stickered-
 
Posts: 4163
Joined: Wed Feb 20, 2008 1:11 pm
Location: Sydney, NSW
Car: MX5 SE / 911 Turbo
Real name: Matt
Profile URL: www.rtdc.com.au

Re: Exhaust?

Postby CappZ » Fri Aug 21, 2009 6:51 pm

Hmm, wow they do look nice. You can see them heaps from the side..

How loud would you say is not loud? :P

Cannons first and only choice or was a muffler considered too?
Image
http://www.lookatyourface.com

MY04 2.5i - 6000k HIDs, 18" RJR Vouge, Kenwood KDC-BT7539U with custom install, 12" Vibe Slick S12, 420w Clarion amp, all white lighting, K&N panel, 4" cannons, lowered.
User avatar
CappZ
 
Posts: 384
Joined: Fri Jun 05, 2009 11:24 pm
Location: Sydney
Car: MY04 2.5i
Real name: Alan

Re: Exhaust?

Postby ultrablue » Sat Aug 22, 2009 9:14 am

Image
Image
these are PHAT GT cannons
Image
User avatar
ultrablue
 
Posts: 424
Joined: Mon Jan 14, 2008 11:54 am
Location: Sydney
Car: 2010 ssv se

Re: Exhaust?

Postby CappZ » Sat Aug 22, 2009 9:40 am

A few months ago there was a EIO thread about these, but I didn't think it actually went through, did many people get these?

I went down to Liverpool Exhaust last week and asked about my options. PHAT (Micheal) wasn't there but another guy was helping me and showing me my options. I think if I get cannons from there then they would look like these.

How loud would you say are these PHAT cannons?


I don't want something over the top loud, thats the main reason why I'm not too sure about having 2 cannons...
Image
http://www.lookatyourface.com

MY04 2.5i - 6000k HIDs, 18" RJR Vouge, Kenwood KDC-BT7539U with custom install, 12" Vibe Slick S12, 420w Clarion amp, all white lighting, K&N panel, 4" cannons, lowered.
User avatar
CappZ
 
Posts: 384
Joined: Fri Jun 05, 2009 11:24 pm
Location: Sydney
Car: MY04 2.5i
Real name: Alan

Re: Exhaust?

Postby ultrablue » Sat Aug 22, 2009 10:26 am

these were done at liverpool also there is a video clip http://www.youtube.com/watch?v=AZC-xlXqJ_Y
Image
User avatar
ultrablue
 
Posts: 424
Joined: Mon Jan 14, 2008 11:54 am
Location: Sydney
Car: 2010 ssv se

Re: Exhaust?

Postby CappZ » Sat Aug 22, 2009 10:36 am

I've watched this video before. I quite like it, but I guess you can't really know what it exactly sounds like until you've heard it in real life. There is so much engine noise in the clip..
Image
http://www.lookatyourface.com

MY04 2.5i - 6000k HIDs, 18" RJR Vouge, Kenwood KDC-BT7539U with custom install, 12" Vibe Slick S12, 420w Clarion amp, all white lighting, K&N panel, 4" cannons, lowered.
User avatar
CappZ
 
Posts: 384
Joined: Fri Jun 05, 2009 11:24 pm
Location: Sydney
Car: MY04 2.5i
Real name: Alan

Re: Exhaust?

Postby ultrablue » Sat Aug 22, 2009 10:39 am

if your going to the dyno day tomorrow you can hear it your self
Image
User avatar
ultrablue
 
Posts: 424
Joined: Mon Jan 14, 2008 11:54 am
Location: Sydney
Car: 2010 ssv se

Re: Exhaust?

Postby CappZ » Sat Aug 22, 2009 11:29 am

Ohh, what time and where?
Image
http://www.lookatyourface.com

MY04 2.5i - 6000k HIDs, 18" RJR Vouge, Kenwood KDC-BT7539U with custom install, 12" Vibe Slick S12, 420w Clarion amp, all white lighting, K&N panel, 4" cannons, lowered.
User avatar
CappZ
 
Posts: 384
Joined: Fri Jun 05, 2009 11:24 pm
Location: Sydney
Car: MY04 2.5i
Real name: Alan

Re: Exhaust?

Postby ultrablue » Sat Aug 22, 2009 4:38 pm

Image
User avatar
ultrablue
 
Posts: 424
Joined: Mon Jan 14, 2008 11:54 am
Location: Sydney
Car: 2010 ssv se

Re: Exhaust?

Postby CappZ » Sun Aug 23, 2009 8:53 am

Damn, can't make it :(
Image
http://www.lookatyourface.com

MY04 2.5i - 6000k HIDs, 18" RJR Vouge, Kenwood KDC-BT7539U with custom install, 12" Vibe Slick S12, 420w Clarion amp, all white lighting, K&N panel, 4" cannons, lowered.
User avatar
CappZ
 
Posts: 384
Joined: Fri Jun 05, 2009 11:24 pm
Location: Sydney
Car: MY04 2.5i
Real name: Alan

Re: Exhaust?

Postby EchoNoise » Mon Aug 24, 2009 12:20 pm

@Ultrablue:

Where abouts did you get those Phat GT Cannons? I wouldn't mind a pair of them :lol:

I'm not into the whole modding scene, but want to get into it, so my exhaust is the first thing :P

Any of these good?
http://www.modyourcar.com.au/3a-racing- ... -tip-p4191
http://www.modyourcar.com.au/magnaflow- ... -tip-p5877
http://www.modyourcar.com.au/magnaflow- ... -tip-p5870

Also, what's the difference between a single wall and a double wall?
User avatar
EchoNoise
 
Posts: 27
Joined: Fri Aug 21, 2009 11:36 am
Location: Peak Crossing, QLD
Real name: Phil

Re: Exhaust?

Postby Fangin_RX » Mon Aug 24, 2009 10:57 pm

Im looking at a Varex, Or a friend can get me a HKS thunder series Burnt titanium tip for $200 or so which will slip onto my 2.5inch piping i also think its a 4 inch.

Might drive down to see Phat cause i do want something loud, but nothing the cops will be like "Look at that another P plater hoon lets get him"
MY00 Subaru Liberty (Legacy) RX 2.5L / 2009 Honda CRF250R
P PLATER
-------------------------------------------------------
Image
User avatar
Fangin_RX
-stickered-
 
Posts: 1892
Joined: Sun Nov 16, 2008 11:26 am
Location: Sydney, NSW
Car: MY00 Liberty RX 2.5L - Gen 3
Real name: Ethan

Re: Exhaust?

Postby CappZ » Mon Aug 24, 2009 10:59 pm

EchoNoise wrote:Where abouts did you get those Phat GT Cannons? I wouldn't mind a pair of them :lol:
...
Also, what's the difference between a single wall and a double wall?



A place called Liverpool Exhaust in NSW, or Phat GT from the forums..I think he works there

For the mufflers your looking at I'm pretty sure single wall and double wall is referring to the tips, whether its just on piece of metal or two to make the tip..
Image
http://www.lookatyourface.com

MY04 2.5i - 6000k HIDs, 18" RJR Vouge, Kenwood KDC-BT7539U with custom install, 12" Vibe Slick S12, 420w Clarion amp, all white lighting, K&N panel, 4" cannons, lowered.
User avatar
CappZ
 
Posts: 384
Joined: Fri Jun 05, 2009 11:24 pm
Location: Sydney
Car: MY04 2.5i
Real name: Alan

Re: Exhaust?

Postby CappZ » Mon Aug 24, 2009 11:03 pm

Fangin_RX wrote:Im looking at a Varex, Or a friend can get me a HKS thunder series Burnt titanium tip for $200 or so which will slip onto my 2.5inch piping i also think its a 4 inch.

Might drive down to see Phat cause i do want something loud, but nothing the cops will be like "Look at that another P plater hoon lets get him"



Hmm..I'm not too sure what brands mine will be if I get them. Just a exhaust place in Penrith, it sources a lot of its products from Australia, even some stuff from Liverpool Exhaust, so I've heard.

You have 2.5" piping on your car? That isn't stock?

Yehh, I don't want something over the top loud...
Image
http://www.lookatyourface.com

MY04 2.5i - 6000k HIDs, 18" RJR Vouge, Kenwood KDC-BT7539U with custom install, 12" Vibe Slick S12, 420w Clarion amp, all white lighting, K&N panel, 4" cannons, lowered.
User avatar
CappZ
 
Posts: 384
Joined: Fri Jun 05, 2009 11:24 pm
Location: Sydney
Car: MY04 2.5i
Real name: Alan

Next

Return to Bling me up

Who is online

Users browsing this forum: No registered users and 1 guest