Carbon Fibre sticker

Here's where you can ask for suggestions what MODs you should consider. Let the experts tell you what you should add.

Carbon Fibre sticker

Postby Fangin_RX » Sun May 24, 2009 1:20 am

Ive been wondering if i can get a carbon fibre look for that horrible wood grain insert, i found one on Ebay but its like a giant sticker pretty much. Has anyone had their Gen 3 Wood grain done to make it look C/F? Cause i was thinking of buying a roll at testing it out
MY00 Subaru Liberty (Legacy) RX 2.5L / 2009 Honda CRF250R
P PLATER
-------------------------------------------------------
Image
User avatar
Fangin_RX
-stickered-
 
Posts: 1892
Joined: Sun Nov 16, 2008 11:26 am
Location: Sydney, NSW
Car: MY00 Liberty RX 2.5L - Gen 3
Real name: Ethan

Postby ultrablue » Sun May 24, 2009 7:14 am

they sell it at autobarn as well
Image
User avatar
ultrablue
 
Posts: 424
Joined: Mon Jan 14, 2008 11:54 am
Location: Sydney
Car: 2010 ssv se

Postby Fangin_RX » Sun May 24, 2009 1:16 pm

oh really? Reckon its worth buying or would it just peel off after some time?
MY00 Subaru Liberty (Legacy) RX 2.5L / 2009 Honda CRF250R
P PLATER
-------------------------------------------------------
Image
User avatar
Fangin_RX
-stickered-
 
Posts: 1892
Joined: Sun Nov 16, 2008 11:26 am
Location: Sydney, NSW
Car: MY00 Liberty RX 2.5L - Gen 3
Real name: Ethan

Postby sinist4 » Sun May 24, 2009 1:30 pm

Fangin_RX wrote:oh really? Reckon its worth buying or would it just peel off after some time?


good things dont last for eva mate hahah
[Team Diamond Grey]
User avatar
sinist4
 
Posts: 1058
Joined: Sat Nov 04, 2006 5:28 pm
Location: sydney

Postby Fangin_RX » Sun May 24, 2009 10:48 pm

sinist4 wrote:
Fangin_RX wrote:oh really? Reckon its worth buying or would it just peel off after some time?


good things dont last for eva mate hahah


thats not true libertys will live forever 8)
MY00 Subaru Liberty (Legacy) RX 2.5L / 2009 Honda CRF250R
P PLATER
-------------------------------------------------------
Image
User avatar
Fangin_RX
-stickered-
 
Posts: 1892
Joined: Sun Nov 16, 2008 11:26 am
Location: Sydney, NSW
Car: MY00 Liberty RX 2.5L - Gen 3
Real name: Ethan

Postby hawks123 » Mon May 25, 2009 7:59 am

It's liberty mate, leave the carbon for a WRX.

See if you can get hold of a B4 silver trim, or sticker, much better look
than carbon. And you and anyone else who get's in the will know it's fake.
User avatar
hawks123
 
Posts: 125
Joined: Mon Mar 02, 2009 7:29 am
Location: East Melbourne
Car: MY08 GT-B & 1990 Laser GL

Postby Fangin_RX » Mon May 25, 2009 7:00 pm

yeah i might look into the B4 trim. Its just im over the whole woodgrain look to girlish :lol:
MY00 Subaru Liberty (Legacy) RX 2.5L / 2009 Honda CRF250R
P PLATER
-------------------------------------------------------
Image
User avatar
Fangin_RX
-stickered-
 
Posts: 1892
Joined: Sun Nov 16, 2008 11:26 am
Location: Sydney, NSW
Car: MY00 Liberty RX 2.5L - Gen 3
Real name: Ethan

Postby swingn » Tue May 26, 2009 10:07 am

Fangin_RX wrote:yeah i might look into the B4 trim. Its just im over the whole woodgrain look to girlish :lol:


Nothing wrong with woodgain mate :) There just a time & place for it... & it's generally in a Jag :P
User avatar
swingn
-stickered-
 
Posts: 4163
Joined: Wed Feb 20, 2008 1:11 pm
Location: Sydney, NSW
Car: MX5 SE / 911 Turbo
Real name: Matt
Profile URL: www.rtdc.com.au

Postby nytrojen » Wed May 27, 2009 11:22 am

swingn wrote:
Fangin_RX wrote:yeah i might look into the B4 trim. Its just im over the whole woodgrain look to girlish :lol:


Nothing wrong with woodgain mate :) There just a time & place for it... & it's generally in a Jag :P


On that note.. thank god the XF doesn't have any of that garbage in there! Real woodgrain, used in a subtle way can look good... but i HATE that fake 3d printed woodgrain. It's absolutely ghastly! Only reason it's used is cos it's cheap. Give me simple coloured plastic over that crap anyday
nytrojen
-stickered-
 
Posts: 1572
Joined: Tue Apr 14, 2009 6:14 pm

Re: Carbon Fibre sticker

Postby jdm rsk » Wed May 27, 2009 1:06 pm

Fangin_RX wrote:Ive been wondering if i can get a carbon fibre look for that horrible wood grain insert, i found one on Ebay but its like a giant sticker pretty much. Has anyone had their Gen 3 Wood grain done to make it look C/F? Cause i was thinking of buying a roll at testing it out
ethan check out this site

http://www.mad-coatings.com/

or you could rub it back and paint it matt black
User avatar
jdm rsk
formerly legacy rsk
 
Posts: 4026
Joined: Sat Oct 07, 2006 10:04 am
Location: Sydney, Australia, Kasuga City Fukuoka Japan
Car: MY 11 VW Golf GTI ED35
Real name: Shane

Re: Carbon Fibre sticker

Postby Fangin_RX » Wed May 27, 2009 7:39 pm

jdm rsk wrote:
Fangin_RX wrote:Ive been wondering if i can get a carbon fibre look for that horrible wood grain insert, i found one on Ebay but its like a giant sticker pretty much. Has anyone had their Gen 3 Wood grain done to make it look C/F? Cause i was thinking of buying a roll at testing it out
ethan check out this site

http://www.mad-coatings.com/

or you could rub it back and paint it matt black


Now thats very tempting, Might get noozle to rip it out so i can give it to them to carbon fibre it :) Cheers for the site Shano
MY00 Subaru Liberty (Legacy) RX 2.5L / 2009 Honda CRF250R
P PLATER
-------------------------------------------------------
Image
User avatar
Fangin_RX
-stickered-
 
Posts: 1892
Joined: Sun Nov 16, 2008 11:26 am
Location: Sydney, NSW
Car: MY00 Liberty RX 2.5L - Gen 3
Real name: Ethan

Re: Carbon Fibre sticker

Postby NoOzL47 » Wed May 27, 2009 8:05 pm

Fangin_RX wrote:
jdm rsk wrote:
Fangin_RX wrote:Ive been wondering if i can get a carbon fibre look for that horrible wood grain insert, i found one on Ebay but its like a giant sticker pretty much. Has anyone had their Gen 3 Wood grain done to make it look C/F? Cause i was thinking of buying a roll at testing it out
ethan check out this site

http://www.mad-coatings.com/

or you could rub it back and paint it matt black


Now thats very tempting, Might get noozle to rip it out so i can give it to them to carbon fibre it :) Cheers for the site Shano


lol whenever you want it done, you know how to contact me rofl
Image

SPL Personal Best: 142.9dB - Youngy Jeezy ft USDA - White Girls
NoOzL47
-stickered-
 
Posts: 856
Joined: Wed Aug 08, 2007 11:24 pm
Location: The Shire Lad!!
Car: Screaming 3.0RB
Real name: Michael

Re: Carbon Fibre sticker

Postby Fangin_RX » Wed May 27, 2009 9:13 pm

NoOzL47 wrote:
Fangin_RX wrote:
jdm rsk wrote:
Fangin_RX wrote:Ive been wondering if i can get a carbon fibre look for that horrible wood grain insert, i found one on Ebay but its like a giant sticker pretty much. Has anyone had their Gen 3 Wood grain done to make it look C/F? Cause i was thinking of buying a roll at testing it out
ethan check out this site

http://www.mad-coatings.com/

or you could rub it back and paint it matt black


Now thats very tempting, Might get noozle to rip it out so i can give it to them to carbon fibre it :) Cheers for the site Shano


lol whenever you want it done, you know how to contact me rofl


Wont be for a while tho so sit tight :P.
MY00 Subaru Liberty (Legacy) RX 2.5L / 2009 Honda CRF250R
P PLATER
-------------------------------------------------------
Image
User avatar
Fangin_RX
-stickered-
 
Posts: 1892
Joined: Sun Nov 16, 2008 11:26 am
Location: Sydney, NSW
Car: MY00 Liberty RX 2.5L - Gen 3
Real name: Ethan

Re: Carbon Fibre sticker

Postby jdm rsk » Sun May 31, 2009 4:47 pm

Fangin_RX wrote:
jdm rsk wrote:
Fangin_RX wrote:Ive been wondering if i can get a carbon fibre look for that horrible wood grain insert, i found one on Ebay but its like a giant sticker pretty much. Has anyone had their Gen 3 Wood grain done to make it look C/F? Cause i was thinking of buying a roll at testing it out
ethan check out this site

http://www.mad-coatings.com/

or you could rub it back and paint it matt black


Now thats very tempting, Might get noozle to rip it out so i can give it to them to carbon fibre it :) Cheers for the site Shano
no problem buddy
User avatar
jdm rsk
formerly legacy rsk
 
Posts: 4026
Joined: Sat Oct 07, 2006 10:04 am
Location: Sydney, Australia, Kasuga City Fukuoka Japan
Car: MY 11 VW Golf GTI ED35
Real name: Shane


Return to Bling me up

Who is online

Users browsing this forum: No registered users and 2 guests