In Need For Mod Ideas For Gen3 Liberty

Here's where you can ask for suggestions what MODs you should consider. Let the experts tell you what you should add.

In Need For Mod Ideas For Gen3 Liberty

Postby Shrab Kebab » Sat Nov 05, 2016 1:25 pm

Hi,
I Have a gen3 2000 liberty rx my00 (Pre Facelift)
Im in need for some mod ideas, It's pretty much stock
Anything Helps
Thanks Alot
Shrab
Shrab Kebab
 
Posts: 6
Joined: Tue Nov 01, 2016 2:25 pm
Car: Subaru Liberty RX 2.5 Gen 3

Re: In Need For Mod Ideas For Gen3 Liberty

Postby Surge » Sat Nov 05, 2016 7:19 pm

It's probably worth more being stock.

But wheels and tyres might be a nice start.
Maybe some brakes from a gt liberty or wrx 4 pots.
New brake fluid.

If it's manual, short shifter and good bushings to keep the gearbox feeling nice.

Sway bars and coilovers.

Look at improving handling and braking. Can't do much for power.
Unless you can find a wrecked wrx or similar to get a drivetrain swap.
DIY romraider E85 tuned Subaru liberty GT Premium 2010 Auto.
New project: Lexus Soarer 2.5gtt jzz30 1992

[ACT]Free Tune help- Learning view, Romraider, ECU Flash
User avatar
Surge
 
Posts: 804
Joined: Sat Dec 08, 2012 1:28 pm
Location: ACT
Car: 2010 lib GT premium + Jzz30 soarer

Re: In Need For Mod Ideas For Gen3 Liberty

Postby Shrab Kebab » Sun Nov 06, 2016 7:27 am

Thanks alot,
And no unfortunately it's an auto
Do you have any wheel size Reccomendations?
Shrab Kebab
 
Posts: 6
Joined: Tue Nov 01, 2016 2:25 pm
Car: Subaru Liberty RX 2.5 Gen 3

Re: In Need For Mod Ideas For Gen3 Liberty

Postby Surge » Sun Nov 06, 2016 7:37 am

I'd go with the 2011-2014 WRX stock wheels.
Size: 17x8"
Offset: +53
Bolt pattern: 5x100
Weight: 21 lbs
OEM-equipped tire size: 235/45R17
Notes: Clears four-pots

Image
DIY romraider E85 tuned Subaru liberty GT Premium 2010 Auto.
New project: Lexus Soarer 2.5gtt jzz30 1992

[ACT]Free Tune help- Learning view, Romraider, ECU Flash
User avatar
Surge
 
Posts: 804
Joined: Sat Dec 08, 2012 1:28 pm
Location: ACT
Car: 2010 lib GT premium + Jzz30 soarer

Re: In Need For Mod Ideas For Gen3 Liberty

Postby Shrab Kebab » Sun Nov 06, 2016 10:56 am

And If I went for these 18'x7' wheels would i have to roll the guards in, also what do you think an appropriate offset would be?
If Not what do you think about painting the stock wheels black and brake calipers red and chuck on some new springs and lower the car a bit
Shrab Kebab
 
Posts: 6
Joined: Tue Nov 01, 2016 2:25 pm
Car: Subaru Liberty RX 2.5 Gen 3

Re: In Need For Mod Ideas For Gen3 Liberty

Postby Surge » Sun Nov 06, 2016 1:33 pm

Your plan sounds like a good idea.

If you change wheels stick to an offset of +50 to +55.
Otherwise you may need to roll the guards.

Coilovers can be had pretty chesp second hand, they would give you a better chance to get the best height.
DIY romraider E85 tuned Subaru liberty GT Premium 2010 Auto.
New project: Lexus Soarer 2.5gtt jzz30 1992

[ACT]Free Tune help- Learning view, Romraider, ECU Flash
User avatar
Surge
 
Posts: 804
Joined: Sat Dec 08, 2012 1:28 pm
Location: ACT
Car: 2010 lib GT premium + Jzz30 soarer

Re: In Need For Mod Ideas For Gen3 Liberty

Postby Surge » Sun Nov 06, 2016 3:36 pm

Depending on the colour of your car, this stuff could look good:

http://www.subyclub.com/topic/12591-199 ... ntry608037
DIY romraider E85 tuned Subaru liberty GT Premium 2010 Auto.
New project: Lexus Soarer 2.5gtt jzz30 1992

[ACT]Free Tune help- Learning view, Romraider, ECU Flash
User avatar
Surge
 
Posts: 804
Joined: Sat Dec 08, 2012 1:28 pm
Location: ACT
Car: 2010 lib GT premium + Jzz30 soarer

Re: In Need For Mod Ideas For Gen3 Liberty

Postby Shrab Kebab » Sun Nov 06, 2016 10:00 pm

Hmm ok thanks I'll take coilovers in mind
I don't think the hood would work because if it's from a b4 it doesn't fit on the gen3 because I have a pre facelift, the front end of the b4 is the same as the post facelift
Shrab Kebab
 
Posts: 6
Joined: Tue Nov 01, 2016 2:25 pm
Car: Subaru Liberty RX 2.5 Gen 3


Return to Bling me up

Who is online

Users browsing this forum: No registered users and 1 guest