club.liberty.asn.au

Could someone tell me which Liberty and/or others came with the black versions of the following 6mt shifter parts or better yet the part numbers if that's ok.

- Reverse collar insert
- Boot collar

Shown below, bottom left of picture, the silver parts on the shifter.
I was going to remove and sand as they are only painted but if they are cheap I'll get some in the next OS order.

Ok, Lathewerks make the boot collar so there is that. Is there an oem 6MT black reverse collar insert?

If you find one let me know if you want to sell the old one. Mines worn and your's looks mint.

waali wrote:Ok, Lathewerks make the boot collar so there is that. Is there an oem 6MT black reverse collar insert?

iirc WCLathewerks do collars and rings....

applegeek897 wrote:If you find one let me know if you want to sell the old one. Mines worn and your's looks mint.

Looks like it from the pictute but silver worn on the far side.

bigBADbenny wrote:

waali wrote:Ok, Lathewerks make the boot collar so there is that. Is there an oem 6MT black reverse collar insert?

iirc WCLathewerks do collars and rings....

That they do, but no black reverse collar. Well they will but it'll be 135ish usd.
Going to go with plan b. Remove parts, sand off silver, polish, refit.

S402 Black Reverse Lockout Collar: 35024FE010
S402 Boot Ring: 35033AG070
http://jp-carparts.com/subaru/partlist. ... fig_id=350

Perrin also do one thats a one piece item so less chance of it rattling around like the stock ones do after a while.

andy_mac wrote:Perrin also do one thats a one piece item so less chance of it rattling around like the stock ones do after a while.

I've seen that one, but very keen to avoid any branding.