MYDZYR wrote:The resonator is basically a bottle that sits below your airbox, bit of fiddling around to get to it but with the removal and a K&N or HKS filter you will notice a nice induction noise. I done this to begin with but ended up going with a AVO CAI.
I came from driving a commodore too haha, big difference between the two! I think you have a good list of mods to start with, I still consider myself a noob too. I have an X-force mid and ultrex quads and actually quite like the sound, not too loud in my opinion. But with that said my next mod will most likely be the dump pipe, for moarr power .
Keep an eye out on the for sale section otherwise have a look at bestmufflers.com.au for the x-force mid, I think their prices are quite reasonable. Also check out the vendor section for parts, such as TCP Auto and Garage88.
I would definitely recommend Matt from Kido Racing for a tune. You can find him in the vendor section too.
Good luck with it all!
jay.ritchie wrote:You’re missing front and rear sway bars on your list.
Cheaper than everything you’ve proposed too!
Pretty sure CAI’s are 90% acoustic aesthetics.
And Matt-Kido is great at what he does. He’s in Melbourne next week! But i guess you won’t have the exhaust done by then haha.
jay.ritchie wrote:You’re missing front and rear sway bars on your list.
Cheaper than everything you’ve proposed too!
Pretty sure CAI’s are 90% acoustic aesthetics.
And Matt-Kido is great at what he does. He’s in Melbourne next week! But i guess you won’t have the exhaust done by then haha.
peadya100 wrote: I think youre right jay. My tuner actually says CAI have a negative effect until you get up into the big power.
I wouldn't get too hung up on exhaust brands. Phat dumps are meant to be good, but are also much more expensive and to be honest wont make much difference if any. Same goes with mufflers. TCP are cheap which is why people go for them, and probably perform no worse than some of the dearer brands. The biggest thing with mufflers for me is exhaust note. Theres a thread on here with exhaust videos for different brands. Worth a look
peadya100 wrote:Are you going for a pod filter or just a cartridge replacement?
Im with you on the quad tips too.. much nicer look in my eyes, and a bit more subtle.
ceeej wrote:
Haha Jay you and your sway bars, they will eventually get done, eventually. Rather get it sounding better, induction and exhaust and then get it sitting nice and low on some 18's before sways.
jay.ritchie wrote:ceeej wrote:
Haha Jay you and your sway bars, they will eventually get done, eventually. Rather get it sounding better, induction and exhaust and then get it sitting nice and low on some 18's before sways.
Still a commodore driver at heart
ceeej wrote:peadya100 wrote:Are you going for a pod filter or just a cartridge replacement?
Im with you on the quad tips too.. much nicer look in my eyes, and a bit more subtle.
Umm I was just thinking of a panel filter. Is it possible to get a pod in the stock air box? Or do you just put one on and take out the air box?
Yer thats for sure, the staggered quads are sick!
peadya100 wrote: Ok so if you go a panel filter dont get the k&n. Its too oily and the oil builds up on your air flow sensor. I had one and had to take it out. If you want the noise, you really need to get a pod set up though. Usually comes with the piping and a box for the pod. Not worth the money for performance, but will certainly make a lot of noise if thats all youre after. Nothing wrong with just wanting the noise though haha
SIMBAT wrote:If you don't over oil the panel filter when you recharge it you wont have any problems with it. Although, if your like my cousin and accidentally use an entire can of the K&N aerosol oil on your filter... then your fkd LMAO.
Users browsing this forum: No registered users and 4 guests