club.liberty.asn.au

hey ANYONE.

so my ride sounds rather lame
besides an exhaust shop,
would anyone have an exhaust to suit a legacy/liberty (wagon) with an ej20,
its the N/A model, im also looking at extractors just to give it the sounds

also as i cant find a straight answer will the ej20/22/25 extractors all fit each other?
like are the mounting points(distance between the holes) the same, flange wise
i cant find any info on distances.

any info is appreciated.

I am quite certain all EJ engines have the same exhaust ports. So pretty much all UEL headers will bolt up, it's just a matter of if they bolt up to the catback or not. They will make your ride sound awesome (like a real turbo/wrx)

As for the rest of the exhaust your best bet would be to get one made up at your local exhaust shop, they are pretty cheap normally. Depending if you need a new cat.

Pretty sure 2.5 genII's and 2.5 Gen III's are not interchangeable.
Heads are different.

thanks guys, as i import heaps of stuff ive got a few metres of 2.5" stainless oval pipe coming so can weld up the rest of the exhaust, pie cut and what not .

was the the ports i was worried about, whether they match up ebay headers here i come :/