Carbon Wrap?

[MH3.0R]

-=sorry for the 4 month bump=-

Do you think you could do the inside door handles with this stuff?
How durable would it be?

A 4 month bump. now that is slack boy

But seriously, I am looking for this material now to do some minor interior shiny bits that keep flashing sunlight directly in my eyes. I am thinking about the shiny silver trim around the auto gear lever and maybe even the side trims of the centre console (the fake wood crap)

Shane, I like your work and let me know how you go with the rear diffuser cause I was considering this material for the standard rear Liberty black plastic trim.

[jdm rsk]

-=sorry for the 4 month bump=-

Do you think you could do the inside door handles with this stuff?
How durable would it be?

A 4 month bump. now that is slack boy

But seriously, I am looking for this material now to do some minor interior shiny bits that keep flashing sunlight directly in my eyes. I am thinking about the shiny silver trim around the auto gear lever and maybe even the side trims of the centre console (the fake wood crap)

Shane, I like your work and let me know how you go with the rear diffuser cause I was considering this material for the standard rear Liberty black plastic trim.

no good for use outside or where there is excesive heat

[MH3.0R]

Shane,

The 3M DI NOC is quoted as good for external use for up to 9 years. Are you using something other than 3M DI NOC?

[jdm rsk]

Shane,

The 3M DI NOC is quoted as good for external use for up to 9 years. Are you using something other than 3M DI NOC?

i did mark and cleaned all surface througly....i was told this by the guy at carbon demon

[MH3.0R]

Shane,

Ok, good info / experience and thanks for the tip. How long did the outside stuff last? Where was it located?

[Carbon Demon]

Shane,

The 3M DI NOC is quoted as good for external use for up to 9 years. Are you using something other than 3M DI NOC?

i did mark and cleaned all surface througly....i was told this by the guy at carbon demon

Hey Shane, nice job! Looks like an OEM fitment!

I covered my whole car in Carbon Fibre Vinyl Wrap. Not a Subaru...but I am looking at buying a STi once the Mazda is sold.





Mike

[MH3.0R]

Mike,

Thanks for the PM pertaining to your products and services. Perhaps you should consider creating a thread in the For Sale Commercial Vendors area so all members can get an idea of what you provide.

[slackboy72]

Apparently there is a new car specific wrap called 1080 from 3M.
Has anyone here tried/seen/heard of this yet?

[Carbon Demon]

Apparently there is a new car specific wrap called 1080 from 3M.
Has anyone here tried/seen/heard of this yet?

3m 1080 .... A CHAMPION vinyl wrap! When we first used it, we were praising 3M non-stop for their first true vehicle wrap vinyl product !

We used 3M 1080 matte silver metallic on the front 1/4 panels of the Mini.

Mini Cooper S vinyl wrapped

Mini matte stockie.jpg (46.85 KiB) Viewed 3636 times

The 1080 CF is good for interior and exterior use.
http://carbonfibrevinylwrap.net.au/wp-content/uploads/wppa/173.jpg

Great stuff! Highly recommended!


Mike

[slackboy72]

What do you use for primer and do you know where I can get primer?

[Carbon Demon]

Where primer is needed (with permission from the client), we use 3M primer 94.

It allows vinyl to even stick to some porous surfaces, like interior scuff plates (sills).


Mike

[slackboy72]

Where do you get it?

[MH3.0R]

Where do you get it?

1. Send Carbon Demon a PM and he will tell you, or
2. Follow some of the links already posted, or
3. Google.

Would you like any further assistance?

[Carbon Demon]

Where do you get it?

PM sent.

[Gozza]

If anyone is interested, this is what it looks like in my 3Gen Liberty

Before

After


Before

After


It has a kind of textured feel to it, not like a bit of plastic. Easier to understand what I mean in person;