Top Mount
Posted: Sat Jun 13, 2009 5:43 pmIve tried to fit a 02 sti wrx top mount to my 02 b4 and it hits my clutch master cyclinder. Does anyone have a solution to my problem? If not im selling a sti top mount!
Thanks
Thanks
Page 1 of 2
Posted: Sat Jun 13, 2009 5:43 pmRe: Top Mount
Posted: Sat Jun 13, 2009 6:22 pmwont fit..you need a 99 version 5 and it is not worth the little gain from it...sell it
Re: Top Mount
Posted: Wed Jul 29, 2009 5:35 pmget a remote clutch cylinder reservoir from a GD WRX (2002 odd)...
Re: Top Mount
Posted: Wed Jul 29, 2009 6:41 pmThis interestes me. Can you tell me a little more as ive never done anything like this.
Re: Top Mount
Posted: Wed Jul 29, 2009 6:52 pmwill need to drain clutch fluid
detach clutch line from the existing resi
detach the resi from the firewall - 2 bolts
detach the resi clutch arm from the clutch pedal
push through the new remote resi clutch arm
attach that new arm to the clutch pedal
reattach the clutch line to the new resi
bolt the new resi to the firewall
secure the remove resi canister
fill clutch fluid and bleed (hard, especially with the tt intercooler set up but your going to remove it anyway).
fit new intercooler
big smile at more consistent intake temps
the remote canister resi should only cost $60-100 depending on the mood of your wrecker.
trying to find a pic. I have more at home I think from the install too...
but for now this pic shows the remote resi canister and you can just see its mounting bracket.
detach clutch line from the existing resi
detach the resi from the firewall - 2 bolts
detach the resi clutch arm from the clutch pedal
push through the new remote resi clutch arm
attach that new arm to the clutch pedal
reattach the clutch line to the new resi
bolt the new resi to the firewall
secure the remove resi canister
fill clutch fluid and bleed (hard, especially with the tt intercooler set up but your going to remove it anyway).
fit new intercooler
big smile at more consistent intake temps
the remote canister resi should only cost $60-100 depending on the mood of your wrecker.
trying to find a pic. I have more at home I think from the install too...
but for now this pic shows the remote resi canister and you can just see its mounting bracket.
Re: Top Mount
Posted: Thu Aug 06, 2009 3:35 pmCheers dude, appreaciate it.
Re: Top Mount
Posted: Sat Jul 31, 2010 9:01 pmis the 99 v5 sti top mount alot better then a stock 02 twin turbo b4 cooler
Re: Top Mount
Posted: Thu Jan 13, 2011 10:46 pmJust a quick question guys, what are the TMIC options?
Ozliberty had a thread, but the forum is horridly buggy.
So far the only decent ones iv found are
http://www.avoturbo.com/avoshop/product ... cts_id=196
and
http://www.hyperflow.com.au/index.php?w ... hytm-libb4
Anybody know if a STI TMIC will fit, or will I have the same clutch cylinder issue?
Ozliberty had a thread, but the forum is horridly buggy.
So far the only decent ones iv found are
http://www.avoturbo.com/avoshop/product ... cts_id=196
and
http://www.hyperflow.com.au/index.php?w ... hytm-libb4
Anybody know if a STI TMIC will fit, or will I have the same clutch cylinder issue?
Re: Top Mount
Posted: Sat Jan 15, 2011 12:38 pmAdrian wrote:get a remote clutch cylinder reservoir from a GD WRX (2002 odd)...
GDA or GDB? the GD chassis went from 01-07
Id be interested in sticking a STI cooler on, would probably work out cheaper than a hyperflow or AVO one (even with the clutch mods)
Re: Top Mount
Posted: Mon Jan 24, 2011 8:38 amI had a cooler from an 04 STi and had the same problem.. went back to stock and sold the cooler.
it's not worth all the effort for the extrememly minimal gains.
Get a direct bolt-on cooler from AVO / Hyperflow instead.
Brendan
it's not worth all the effort for the extrememly minimal gains.
Get a direct bolt-on cooler from AVO / Hyperflow instead.
Brendan
Re: Top Mount
Posted: Mon Jan 24, 2011 10:26 amOr Cooling-Pro
Re: Top Mount
Posted: Mon Jan 24, 2011 8:53 pmCant seem to find their website, or places to buy one anywho..
Just trying to do a price comparison, hard to find liberty stuff.
If you want a wrx though, your choices are endless
Just trying to do a price comparison, hard to find liberty stuff.
If you want a wrx though, your choices are endless
Re: Top Mount
Posted: Tue Jan 25, 2011 7:47 amit's all the same.
any dual-entry TMIC to suit WRX's from 1998 onwards will work (fitting in the bay may be different)
you just bolt on the Alloy elbows from the B4 TMIC and you're away
although you need to match one the the BOV you want to use
the one i pictured is to suit a MY98 WRX with universal fit BOV
cooling pro is usually found on e-bay
any dual-entry TMIC to suit WRX's from 1998 onwards will work (fitting in the bay may be different)
you just bolt on the Alloy elbows from the B4 TMIC and you're away
although you need to match one the the BOV you want to use
the one i pictured is to suit a MY98 WRX with universal fit BOV
cooling pro is usually found on e-bay
Re: Top Mount
Posted: Wed Jan 15, 2014 6:49 pmthread revival!
is it worth upgrading from the stock TMIC? on the hyperflow website its 1.2k, would they be better than a wrx TMIC? im tempted...
is it worth upgrading from the stock TMIC? on the hyperflow website its 1.2k, would they be better than a wrx TMIC? im tempted...
Re: Top Mount
Posted: Mon Jan 20, 2014 4:45 pmMy thoughts, however I'm no expert, would be unless you are doing a CAI, exhaust and a retune at the same time you are not going to notice big gains. I bought mine with all that pre-done and she's got quite a bit more kick than a bog standard.