Need model B4 Base Ingition Map

For the older twin turbo B4 models

Need model B4 Base Ingition Map

Postby scooby_001 » Wed Jul 13, 2011 9:39 pm

Hi guys,

Ive been searching for days and days with no luck and hoping someone here can help me out. Ive got an MY98 WRX and ive dropped a Liberty B4 powerplant in it and have switched it to a single turbo setup. Ive also upgraded the ECU to a PowerFC but its a EJ20K PowerFC with the base map for a EJ20K. What im after is the base map for any model of Liberty B4 which i can start with and use to tune my ECU as the EJ20K base map is completely different due to the difference in compression. Is anybody out there able to help me? Any ignition map in any state would be awesome as i just need it as a starting point from which i can start tuning. I have already tuned my fuel and my AFRs are spot on, now its ignition time...

I have attached my current ignition map so you can see just how far off the current one is.

Thanks in advance
Rich
Attachments
Ign Map.JPG
EJ20K Base Map
Ign Map.JPG (119.31 KiB) Viewed 2968 times
scooby_001
 
Posts: 7
Joined: Wed Jul 13, 2011 9:16 pm
Car: MY98 WRX with B4 Powerplant
Real name: Rich

Re: Need model B4 Base Ingition Map

Postby scooby_001 » Fri Jul 15, 2011 6:06 pm

Please help guys... Im so desperate ill Paypal $20 across to the first person who can send me an untouched base ignition map for a Legacy B4 2.0 EJ20 TT as its delivered from the factory - any takers?
scooby_001
 
Posts: 7
Joined: Wed Jul 13, 2011 9:16 pm
Car: MY98 WRX with B4 Powerplant
Real name: Rich

Re: Need model B4 Base Ingition Map

Postby telemekas » Sat Jul 16, 2011 12:10 am

If you can you use RomRaider/Enginuity? Their is a freely available JDM TT map with its XML available.
telemekas
 
Posts: 43
Joined: Tue Aug 31, 2010 10:58 pm
Location: Adelaide SA
Car: B4/BE5 Rev E BITURBO TD04S-13TXT

Re: Need model B4 Base Ingition Map

Postby scooby_001 » Sat Jul 16, 2011 9:27 am

Hi telemekas,

Thanks for getting back to me mate. I dont have the dongle used with RomRaider but i downloaded it anyway earlier this week. I go hold of heaps of B4 users HEXs and installed every XML definition for B4s that i could, but every ROM i tried to open said there were no definitions loaded for it? nothing wants to work :( Is there something im doing wrong?

Thanks
Rich
scooby_001
 
Posts: 7
Joined: Wed Jul 13, 2011 9:16 pm
Car: MY98 WRX with B4 Powerplant
Real name: Rich

Re: Need model B4 Base Ingition Map

Postby telemekas » Sat Jul 16, 2011 1:19 pm

What size are the XML definitions that you have for the TT?.
The TT XML should be 176KB .
telemekas
 
Posts: 43
Joined: Tue Aug 31, 2010 10:58 pm
Location: Adelaide SA
Car: B4/BE5 Rev E BITURBO TD04S-13TXT

Re: Need model B4 Base Ingition Map

Postby scooby_001 » Sat Jul 16, 2011 9:40 pm

hi mate,

I finally managed to get the definition file but now its looking like every Standard ECU ROM only holds a few basic parts? Ive attached a screenshot

Ive also found the following thread which says the definitions for the B4 only have the DTS, not the tuning part?

http://romraider.com/forum/viewtopic.ph ... 55&start=0

Does this sound about right? if so i guess what im looking for doesn't actually exist...

Thanks
Richard
Attachments
StockECU.jpg
StockECU.jpg (43.24 KiB) Viewed 2932 times
scooby_001
 
Posts: 7
Joined: Wed Jul 13, 2011 9:16 pm
Car: MY98 WRX with B4 Powerplant
Real name: Rich

Re: Need model B4 Base Ingition Map

Postby telemekas » Sun Jul 17, 2011 12:37 am

pm sent
telemekas
 
Posts: 43
Joined: Tue Aug 31, 2010 10:58 pm
Location: Adelaide SA
Car: B4/BE5 Rev E BITURBO TD04S-13TXT


Return to B4 Specific

Who is online

Users browsing this forum: No registered users and 6 guests