can i use the factory speaker wires to new HU
Posted:
Fri Jul 29, 2022 9:34 pm
by Grego
Gen 4 liberty
i have a new sony headunit and i would like to use the factory speaker wires to keep everything neat
is it a case of me cutting and soldering in the new HU or is there a harness/plug to go from sony HU to factory speaker wires,
Re: can i use the factory speaker wires to new HU
Posted:
Sun Jul 31, 2022 8:34 pm
by Ric
If it's a Macintosh unit, you're in for extra work.
The connection from the head unit to the amp under the seat is a differential signal, which isn't compatible with most other head units.
So, you're going to have to run extra wires to run to the speaker wires under the seat.
Re: can i use the factory speaker wires to new HU
Posted:
Wed Aug 03, 2022 9:13 pm
by Grego
Thats Ok,
once i do that , Can i just unpin at the old amp connector and solder the positve and negative factory speaker wires from the 6.5" driver , will i get full frequency from the new HU , or will the trebles have been crossovered out in the door wiring ?
- Audio Wiring Diagram 2022-08-03 213431.png (104 KiB) Viewed 1728 times
- Audio Wiring Diagram 2022-08-03 213524.png (93.65 KiB) Viewed 1728 times