club.liberty.asn.au

I have 04 liberty and want to upgrade stereo to double din hu .. as everyone knows you need to get Double din fascia and wiring adapters.. here is my issue I have the analogue ac/heater controls. This is my stock unit https://aerpro.com/sites/default/files/ ... limate.jpg I can not find anywhere that sells fascia for right hand drive model that will fit with the analogue ac controls. Every site has the left hand drive fascia s only.
https://www.google.com.au/shopping/prod ... 03385,cs:1
If I can not just get fascia that’s I can use with stock ac, will a digital ac heater have same connections as analogue one ? If not is there an adapter? Please help have looked for too long for a solution.. or if I get a left hand drive analogue ac heater control To fit left hand fascia will it be able to connect ? Please help...

Try Matthew Parslow on FB aka hardware bob on the forum for fascias and conversion harnesses...
viewtopic.php?f=10&t=27514

Actually, you could try find out if the hazard and AC buttons are movable/interchangeable or specific to ldh and rhd cars.

Or fill and drill the seicane bezel you posted, as Matt suggested.
Its supplied in base black, so you’ll probably want to paint it to match your interior.

Or get a jdm nav bezel and install a short chassis/shallow mount depth nav in the dash cubby position.

Jdm nav bezels

The wide type (usually used for nexus install or Toyota/Subaru wide head units) is H0017AG915 which has the 200x100mm cutout.

The 2din type is H0017AG932 with the 180x119mm cutout.