Page 1 of 1

Cable identification

PostPosted: Sat Mar 24, 2018 12:25 pm
by TFish
Hi all,

I was removing an old hands free (nokia ck-7w which someone had snipped off the mic cable but it was still hooked up to power) and when putting everything back together I found this cable.

Can anyone tell me what it is for?

The last pic is when I could trace to it either going under the dash or into the a pillar.

Cheers,
TFish

20180324_104329_resized.jpg
20180324_104329_resized.jpg (35.7 KiB) Viewed 3836 times

20180324_104333_resized.jpg
20180324_104333_resized.jpg (46.2 KiB) Viewed 3836 times

20180324_104345_resized.jpg
20180324_104345_resized.jpg (73.11 KiB) Viewed 3836 times

Re: Cable identification

PostPosted: Sat Mar 24, 2018 12:53 pm
by BillyCorgi
Is a coaxial cable, probably for remote antena for HandsFree Kit

Re: Cable identification

PostPosted: Sat Mar 24, 2018 1:04 pm
by TFish
thanks mate,

The hands free that was in it didn't have a port for the coax cable and the car doesn't have an external antenna but indeed it still could be from an earlier hands free. Left to right is power connector, craddle connector, control knob (left in the pic) connector, mic and speaker. it was all plugged in when I found it although 2 of the cables had been snipped off.

2320671400_1419210358.jpg
2320671400_1419210358.jpg (168.29 KiB) Viewed 3831 times