by andy_mac » Sat Jan 31, 2015 3:24 pm
So push both seats completely forward and there will be two plastic covers, one on each side, can't miss. Flip the covers off, and undo the screws beneath, that'll allow the back half to lift freely.
Front half pop out the shifter boot, flathead screwdriver down the between the silver ring and plastic surround and it'll ping off.
Can't remember if the screws you'll see in front of you are needed for this process, I had everything apart at the same time so they were needed. If not them then there is just a plastic clip like thing on each side to pry away. If you start carefully lifting from the back you should be able to see the ones that need to come out, a firm tug was all it needed to get mine up.
2000 JDM Legacy B4 RSK - SOLD
2006 JDM Legacy BP5 GT Spec B wagon
2011 VW T5 van 2.0L of turbo diesel awesomeness