Page 1 of 3
Help with install Willing to learn

Posted:
Thu Aug 14, 2014 7:22 pm
by THERB3
Just wondering if anyone has had this unit and what would you pay for it, for a used model.
I could obtain one very cheap. Am I wasting my time with this or save a little more.
Re: Pioneer AVH 4450BT

Posted:
Thu Aug 14, 2014 7:46 pm
by THERB3
I need to know pretty quickly as this item is at an auction. Goes off in 20 mins
So if anyone has any info let me know.
Thanks
Re: Pioneer AVH 4450BT

Posted:
Mon Aug 18, 2014 9:40 am
by Tanetoa
Did you end up buying it?
I'd be interested to hear your feedback, especially the app radio side and even more so the interface with dash command, if you use it, that is.
Re: Pioneer AVH 4450BT

Posted:
Mon Aug 18, 2014 11:21 am
by THERB3
No looking at the AVH 8550BT with HDMI and all the goodies right now.
Also it is on sale.
Re: Which unit to buy Pioneer AVH-X5650BT or 8550BT HELP PLE

Posted:
Mon Aug 18, 2014 12:28 pm
by THERB3
This is for all the car entertainment enthusiasts. i need help which unit to buy.
In a nut shell which is better ?????? I need Bluetooth to sinc phone, mirror-link for navi and so on......
Car stereo's are to complicated

Re: Which unit to buy Pioneer AVH-X5650BT or 8550BT HELP PLE

Posted:
Mon Aug 18, 2014 4:28 pm
by Tanetoa
from what little I have read the only difference between the 2 is an SD slot and the 8550BT supports an android app radio mode.
http://www.burnpavement.com/article.php?id=1133
Re: Which unit to buy Pioneer AVH-X5650BT or 8550BT HELP PLE

Posted:
Mon Aug 18, 2014 5:33 pm
by THERB3
Will be buying the 8550BT.
Do I have any installers out there to fit this for a fee of course.
Re: Help with install Willing to learn

Posted:
Tue Aug 19, 2014 8:49 am
by THERB3
Hi guys,
I need help with my install and I am keen to learn. I am willing to pay someone to show me and help me with the install.
What do I need other then my unit or amp in regards to cables.
I am not changing any speakers for the meantime. It's only the headunit and amp.
Do I have any takers and I can come to you, the reason behind this, is I want to learn installing my headunits.
Also I am trying to learn to bypass the handbrake issue that disables the unit to play movies. Call me a dare devil LOL
Let me know if anyone is keen
Re: Help with install Willing to learn

Posted:
Tue Aug 19, 2014 12:07 pm
by gradg
The handbrake one is easily done. Run the core responsible for it direct to earth/chassis instead of to the handbrake light.
A good idea to reach out. Haven't got any mates that work in install bays or anything at JB hifi?
I'm an electrician myself but learnt a lot about car stereo when I was building up cars years ago form a mate that did it professionally, i'd work on his car, he'd install my in car gadgets.
Re: Help with install Willing to learn

Posted:
Tue Aug 19, 2014 12:34 pm
by THERB3
Thanks so ground the handbrake cable and that is it.
Do I have any takers with a little time up there sleeve ?
Re: Help with install Willing to learn

Posted:
Tue Aug 19, 2014 3:42 pm
by gradg
THERB3 wrote:Thanks so ground the handbrake cable and that is it.
Spot on!
Re: Help with install Willing to learn

Posted:
Tue Aug 19, 2014 11:49 pm
by bigBADbenny
What needs doing?
Have you got all the required bits for the install?
Re: Help with install Willing to learn

Posted:
Wed Aug 20, 2014 7:03 am
by THERB3
PM sent
Re: Help with install Willing to learn

Posted:
Wed Aug 20, 2014 9:02 am
by bigBADbenny
So you are replacing the stock 6cd mac and it's amp under the seat?
I have never done it, I'm planning a sub amp and sub install.
Get a amp wiring kit from car audio shop or eBay, 4 or 8 awg should be fine.
These come with fuse power neg etc. Around $50
I'd imagine you'll need a clarion type harness adaptor thing to get power etc into the new HU.
And the speaker wire adaptors might be required as the stockers might have dedicated plugs on the end?
Are you running a seperate sub amp?
Re: Help with install Willing to learn

Posted:
Wed Aug 20, 2014 11:17 am
by THERB3
Hey Ben,
No wanting only the one amp to fire speakers and sub for the time being.
So all I want is to install HU and amp of needed.
I need to know what wires, harnesses, fuses and RCA's to get this project going.
Thanks.