Does the factory setup use a standard coaxisl plug for the aerial, or is an adapter of some kind required?
Thanks for such an informative thread.
GTbee wrote:Does the factory setup use a standard coaxial plug for the aerial, or is an adapter of some kind required?
GTbee wrote:Does the factory setup use a standard coaxisl plug for the aerial, or is an adapter of some kind required?
mr_sinistah wrote:Please get new speakers, I got Polk MM6501 and have not looked back. DB6501 also good. Hell, anything is better than those paper crusted weather torn McIntosh speakers. Open up your door cards and I guaranteed they will crumble at first touch.
Do yourself a favour!!!!!!!!
tssfka wrote:...
The pinouts are (looking at the connector from the car harness):
- Code: Select all
1 2 3 |___| 4 5 6
7 8 9 10 11 12 13 14
1 - Illumination 12v (Violet/Grey)
2 - "Bright Mode" (Night Illumination Dimness Cancellation) (Green)
3 - Steering wheel controls + (Violet/White)
4 - NC
5 - NC
6 - +12V Battery (Constant on / Memory Power) (Blue/Red)
7 - Dimmer for illumination variable voltage (Black/White)
8 - NC
9 - Steering wheel controls - (Orange/White)
10 - +12V Accessory (key-switched) (Yellow/Red)
11 - Ground (Black)
12 - NC
13 - NC
14 - Power Antenna (Yellow/Black)
Users browsing this forum: No registered users and 22 guests