by BMCracer » Sat Jul 15, 2017 8:57 am
Fairly new around here, but enjoying reading all the threads, and soaking up the wealth on info, especially the tech / geek stuff, cos I'm not that great with working out some of that stuff. So, a few questions if you don't mind.
I've just picked up a 2013 Nexus 7, and sorting out the other bits and pieces I need for an install. Looking at the Behringer UCA202, there seem to be some letters afterwards, like UCA202 SP, or UCA202 PK, also NY, AE, and CV. What do these 2 letters mean? Are any of these units going to work for me, or do I need to get a particular one?
I'm planning on / want to run:
Nexus 7 2013 with Timors' Rom
Behringer UCA202
USB OTG Y cable
Reversing camera - do I need the 4 port USB hub for this? or can I plug the camera ( either a USB camera, or with a UVC capture device to convert from RCA to USB ) into the spare normal size female socket on the USB OTG Y cable?
BtSsm, with a Tactrix cable rather than bluetooth.
Not sure yet about the DC-DC USB power supply? If I understand it correctly, this would get its' feed from 12V somewhere on the car ( cig lighter? ) and the output ( USB ) would feed the 4 port USB hub if running one, or if not, then the USB OTG Y cable.
My car is a NZ new ( so ADM model ) 2007 facelift 3.0 RB wagon. It has the Macintosh stereo with lots of speakers and steering wheel controls, all completely stock. Not sure the exact stereo model, how can I find that out short of pulling the dash / centre console to bits to pull the stereo out to check for a sticker on the back?
It seems that the Electric Design FSL-21 McIntosh AUX in unit is no longer available, so what is the current unit of choice?
Thanks in advance.
2007 NZ new 3.0 Spec B 5EAT wagon in Brilliant Silver 39D