club.liberty.asn.au

Does anyone know if the Jaycar kevlar coaxials (http://www.jaycar.com.au/productView.asp?ID=CS2402) will fit the front door of a Gen 4 with a 16mm spacer? The jaycar website doesn't have the depth listed.

Google suggests a depth of 66mm but that was from a forum several years ago, the speakers have since been reproduced and I'm not sure if they are the same.

09libs works at jaycar he could probably help you out

For those following at home, the Jaycar Response 6.5" kevlars speakers measure 70mm from the basket to the back plate. You will need a 22mm spacer. I glued a 6mm sheet of MDF to a 16mm sheet. The door skin misses the integrated tweeter by aprox. 3 or 4mm.