Hi Guys,
I have an 05 3.0R with McIntosh System and have recently bought a Kenwood DDX7036BT.
Does anyone have any pointers for install?
Harness needed, McIntosh Amp wiring/connection etc.
Am I better off running the speakers off the HU or is the factory amp a better temporary option?
Keep in mind that this is the first step, the next steps are replacing the McIntosh amp & front stage,
Dynamat and twin 12"s with second Amp
Any guidance greatly appreciated.
Jimmy
Australian Liberty Owners Club
Kenwood DDX7036BT Install
3 posts
• Page 1 of 1
Kenwood DDX7036BT Install
by BLKD OUT » Wed Apr 11, 2012 12:27 am
- BLKD OUT
- Posts: 3
- Joined: Fri Oct 21, 2011 1:49 pm
- Car: 2005 Liberty 3.0R
Re: Kenwood DDX7036BT Install
by garbo41610 » Wed Apr 11, 2012 11:48 am
You are going to have to hack up the DIN cable to be able to run the Mc amp via RCA.
Read through the audio section for the wiring harnesses you'll need to hook up the head unit.
It'll be easier to run the speakers from the amp.
Don't forget the fascia kit to install the headunit.
2 x 12's is overkill esp in a Subaru but depending on the hardware being used and the install and tuning it won't be too bad.
Read through the audio section for the wiring harnesses you'll need to hook up the head unit.
It'll be easier to run the speakers from the amp.
Don't forget the fascia kit to install the headunit.
2 x 12's is overkill esp in a Subaru but depending on the hardware being used and the install and tuning it won't be too bad.
Car(s): Steel Silver MY10 GT Wagon + 1985 Subaru Sherpa
Mods: (GT) HKS Panel Filter. The HKS I put in the MY10 is the same filter I took out of my MY05 GT. So yes, they do fit. Custom leather heel pad to minimise carpet wear in the drivers footwell. Slotted front rotors. (Sherpa) 14'' 6 Spoke mags, Chrome Gear Shift (sick!), Alloy Pedals (sicker!), new positive and negative battery terminals, Alpine cda-9827 H/U, JBL GT 6x9's boxed and mounted (sickest!), Kicker DS650.2 component speakers mounted in the footwells in flibreglass pods, Alpine MRP-F200 4 channel amp (4x40wRMS), Rebadged with hektik chrome eBay badges, STi stickers for more powaaaa, "leather" handbrake boot, recarpetted with grey/black car carpet from Bunnings, sick Clarke Rubber boot mat, polished and waxed.
Mods: (GT) HKS Panel Filter. The HKS I put in the MY10 is the same filter I took out of my MY05 GT. So yes, they do fit. Custom leather heel pad to minimise carpet wear in the drivers footwell. Slotted front rotors. (Sherpa) 14'' 6 Spoke mags, Chrome Gear Shift (sick!), Alloy Pedals (sicker!), new positive and negative battery terminals, Alpine cda-9827 H/U, JBL GT 6x9's boxed and mounted (sickest!), Kicker DS650.2 component speakers mounted in the footwells in flibreglass pods, Alpine MRP-F200 4 channel amp (4x40wRMS), Rebadged with hektik chrome eBay badges, STi stickers for more powaaaa, "leather" handbrake boot, recarpetted with grey/black car carpet from Bunnings, sick Clarke Rubber boot mat, polished and waxed.
-
garbo41610 - -stickered-
- Posts: 1786
- Joined: Thu Jun 11, 2009 11:28 am
- Location: Emu Heights and Randwick depending on time of day
- Car: MY10 GT Wagon Steel Silver
- Real name: Phil
Re: Kenwood DDX7036BT Install
by cooki_monsta » Thu Apr 18, 2013 2:17 pm
BLKD OUT wrote:Hi Guys,
I have an 05 3.0R with McIntosh System and have recently bought a Kenwood DDX7036BT.
Does anyone have any pointers for install?
Harness needed, McIntosh Amp wiring/connection etc.
Am I better off running the speakers off the HU or is the factory amp a better temporary option?
Keep in mind that this is the first step, the next steps are replacing the McIntosh amp & front stage,
Dynamat and twin 12"s with second Amp
Any guidance greatly appreciated.
Jimmy
Keep me posted on the install! I'm thinkin about the same source unit.
Philips 4000 K Bulbs / Alpine ICS-X7 Mobile Media Station / Pioneer 2-Way Component Speakers and 2-Way Coaxial Speakers / Exedy Heavy Duty Clutch with Single Mass Flywheel / XForce Mufflers / Tein Street Flex Coil-Overs / Subaru 17x8J +53 mm Wheels with 235/40R17 Dunlop SP Sport 01 Tires / Cusco Rear Sway Bar, End Links, and Brackets / DBA T2 Brake Rotors / Project Mu NS Brake Pads
http://web.stagram.com/n/cooki_monsta/
http://web.stagram.com/n/cooki_monsta/
-
cooki_monsta - Posts: 216
- Joined: Thu Sep 06, 2012 9:38 pm
- Location: South East Melbourne
- Car: MY05 BL9 > MY08 Z33
- Real name: Alister
- Profile URL: http://web.stagram.com/n/cooki_monsta/
3 posts
• Page 1 of 1
Who is online
Users browsing this forum: No registered users and 4 guests