club.liberty.asn.au

Hey Justin,

Got it from here: https://www.subarugenuineparts.com/oe_parts_cat.html (same as the link at the top of this page).

Part number: #83154AG001

Wasn't too difficult to fit although I did change the steering wheel on my old Falcon and this was basically the same. I just get nervous around the airbag, that's all.

I paid $143 including postage.

For everyones info.

Ive contacted Subaru Docklands. They've quoted $154 for the part.
Their service dept. have said ~$200 to install.

I rang makin and luby. They've quoted more for the part (about $169), but their service department won't do the install.

I'm not 100% confident installing it myself, and believe that the $200 seems rather excessive when they've quoted 1-1.5hrs.....

Give DR Concepts a call, I'm sure they'll be able to install it for you - I've had all my aftermarket items like suspension work, braces etc done by them

http://www.drconcepts.com.au/

It shouldn't take 1 - 1.5 hours to install. It's also not that difficult if you can get past the fear of the airbag exploding.

$154 is pretty good for the part though.

This is the walkthrough for the steering wheel:

http://forums.nasioc.com/forums/showthr ... ?t=1881734

Follow that and you should be able to install the steering wheel controls. As long as you disconnect the battery, press the brake a few times and wait 20 or so mins you will be fine.

I've got the part for the 05 and have installed it but still need to do the wiring at the back to make it work with an Eclispe head unit. Haven't got around to taking apart the dash again yet.

That's a nice wheel.

Sent from my HTC EVO 3D X515a using Tapatalk

I should be getting my stereo controls from the us next week for those of you who have put the controls in ,is it as simple as plugging it in to the wiring that is already in the steering wheel or have I bitten of more then I can chew , I've got a my08 premium with the six stacker cd macintosh stereo
Thanks, any advise is appreciated
Steve

Bump

put the part in today cruise control works ,horn works but the f@#$%n stereo does not work through the steering wheel controls
for those who said it was a case of plug it in and play how did you get it to work do i need to do anything else to get it to work
or have i just wasted $$$$ on something that was never going to work

Update. Swc are now working
Thanks to all who put their input in

sjm69 wrote:Update. Swc are now working
Thanks to all who put their input in

what did you do to get it working? everything I've read said those buttons wont work with MY07/MY08...

Drew wrote:

sjm69 wrote:Update. Swc are now working
Thanks to all who put their input in

what did you do to get it working? everything I've read said those buttons wont work with MY07/MY08...

from the swc wiring i spliced two wires and then went straight into the back of the stereo
works fine

If you have a look at the legacy gt forum There is a step by step guide to how to do it

sjm69 wrote:If you have a look at the legacy gt forum There is a step by step guide to how to do it

Are you able to post the link?

Hybrid wrote:

sjm69 wrote:If you have a look at the legacy gt forum There is a step by step guide to how to do it

Are you able to post the link?

only if i know how



jump onto legacygt.com
and look for "how to install steering wheel radio controls"
fingers crossed for you its just plug and play