Thanks guys
Australian Liberty Owners Club
Gen3 Head Unit and Speaker upgrades
5 posts
• Page 1 of 1
Gen3 Head Unit and Speaker upgrades
by Ironman » Tue Nov 15, 2011 6:11 am
Can anyone point me towards a good set of instructions on how to swap the speakers and head unit on a gen3, i abused the search tool, but couldnt really find anything. Maybe im searching the wrong words
Thanks guys
Thanks guys
-
Ironman - Posts: 10
- Joined: Sat Nov 12, 2011 8:45 pm
- Location: Melbs
Re: Gen3 Head Unit and Speaker upgrades
by garbo41610 » Tue Nov 15, 2011 7:42 am
It's a pretty basic process depending on the speakers you want to install. Have you got a budget in mind??? Do you have an idea on the speakers you want??? Do some reading here http://www.fhrxstudios.com.au/ and you will get all the info you need on how to properly install speakers. One thing I will say is steer clear of Autobarn, Strathfield Car Radio, JB Hifi etc... They are all hacks.
Can't comment on the installation of a HU in a GenIII but it couldn't be that difficult. You may need to buy a fascia kit to install an aftermarket HU, and also look into buying a wiring harness from any car audio shop. Aerpro make really good wiring harnesses.
Can't comment on the installation of a HU in a GenIII but it couldn't be that difficult. You may need to buy a fascia kit to install an aftermarket HU, and also look into buying a wiring harness from any car audio shop. Aerpro make really good wiring harnesses.
Car(s): Steel Silver MY10 GT Wagon + 1985 Subaru Sherpa
Mods: (GT) HKS Panel Filter. The HKS I put in the MY10 is the same filter I took out of my MY05 GT. So yes, they do fit. Custom leather heel pad to minimise carpet wear in the drivers footwell. Slotted front rotors. (Sherpa) 14'' 6 Spoke mags, Chrome Gear Shift (sick!), Alloy Pedals (sicker!), new positive and negative battery terminals, Alpine cda-9827 H/U, JBL GT 6x9's boxed and mounted (sickest!), Kicker DS650.2 component speakers mounted in the footwells in flibreglass pods, Alpine MRP-F200 4 channel amp (4x40wRMS), Rebadged with hektik chrome eBay badges, STi stickers for more powaaaa, "leather" handbrake boot, recarpetted with grey/black car carpet from Bunnings, sick Clarke Rubber boot mat, polished and waxed.
Mods: (GT) HKS Panel Filter. The HKS I put in the MY10 is the same filter I took out of my MY05 GT. So yes, they do fit. Custom leather heel pad to minimise carpet wear in the drivers footwell. Slotted front rotors. (Sherpa) 14'' 6 Spoke mags, Chrome Gear Shift (sick!), Alloy Pedals (sicker!), new positive and negative battery terminals, Alpine cda-9827 H/U, JBL GT 6x9's boxed and mounted (sickest!), Kicker DS650.2 component speakers mounted in the footwells in flibreglass pods, Alpine MRP-F200 4 channel amp (4x40wRMS), Rebadged with hektik chrome eBay badges, STi stickers for more powaaaa, "leather" handbrake boot, recarpetted with grey/black car carpet from Bunnings, sick Clarke Rubber boot mat, polished and waxed.
-
garbo41610 - -stickered-
- Posts: 1786
- Joined: Thu Jun 11, 2009 11:28 am
- Location: Emu Heights and Randwick depending on time of day
- Car: MY10 GT Wagon Steel Silver
- Real name: Phil
Re: Gen3 Head Unit and Speaker upgrades
by garbo41610 » Tue Nov 15, 2011 7:47 am
Here is an install guide for WRX doors... It won't be too dissimilar to Lib doors. Subaru doors are a terrible environment for speakers.
http://www.rexnet.com.au/forum/index.ph ... opic=57803
http://www.rexnet.com.au/forum/index.ph ... opic=57803
Car(s): Steel Silver MY10 GT Wagon + 1985 Subaru Sherpa
Mods: (GT) HKS Panel Filter. The HKS I put in the MY10 is the same filter I took out of my MY05 GT. So yes, they do fit. Custom leather heel pad to minimise carpet wear in the drivers footwell. Slotted front rotors. (Sherpa) 14'' 6 Spoke mags, Chrome Gear Shift (sick!), Alloy Pedals (sicker!), new positive and negative battery terminals, Alpine cda-9827 H/U, JBL GT 6x9's boxed and mounted (sickest!), Kicker DS650.2 component speakers mounted in the footwells in flibreglass pods, Alpine MRP-F200 4 channel amp (4x40wRMS), Rebadged with hektik chrome eBay badges, STi stickers for more powaaaa, "leather" handbrake boot, recarpetted with grey/black car carpet from Bunnings, sick Clarke Rubber boot mat, polished and waxed.
Mods: (GT) HKS Panel Filter. The HKS I put in the MY10 is the same filter I took out of my MY05 GT. So yes, they do fit. Custom leather heel pad to minimise carpet wear in the drivers footwell. Slotted front rotors. (Sherpa) 14'' 6 Spoke mags, Chrome Gear Shift (sick!), Alloy Pedals (sicker!), new positive and negative battery terminals, Alpine cda-9827 H/U, JBL GT 6x9's boxed and mounted (sickest!), Kicker DS650.2 component speakers mounted in the footwells in flibreglass pods, Alpine MRP-F200 4 channel amp (4x40wRMS), Rebadged with hektik chrome eBay badges, STi stickers for more powaaaa, "leather" handbrake boot, recarpetted with grey/black car carpet from Bunnings, sick Clarke Rubber boot mat, polished and waxed.
-
garbo41610 - -stickered-
- Posts: 1786
- Joined: Thu Jun 11, 2009 11:28 am
- Location: Emu Heights and Randwick depending on time of day
- Car: MY10 GT Wagon Steel Silver
- Real name: Phil
Re: Gen3 Head Unit and Speaker upgrades
by Ironman » Tue Nov 15, 2011 8:12 am
Sweet. Thanks for the info mate.
I already have a single din head unit, cheap sub and amp (im not really after too much bass). All i need is a set of splits. I guess my budget is pretty low (~$150), so im trawling eBay looking for a used set or alpines or JL's.
Do you know of any Brick and mortar stores that would stock Sound deadener?
I already have a single din head unit, cheap sub and amp (im not really after too much bass). All i need is a set of splits. I guess my budget is pretty low (~$150), so im trawling eBay looking for a used set or alpines or JL's.
Do you know of any Brick and mortar stores that would stock Sound deadener?
-
Ironman - Posts: 10
- Joined: Sat Nov 12, 2011 8:45 pm
- Location: Melbs
Re: Gen3 Head Unit and Speaker upgrades
by garbo41610 » Tue Nov 15, 2011 8:37 am
fhrx studios FTW... They do free postage.
Car(s): Steel Silver MY10 GT Wagon + 1985 Subaru Sherpa
Mods: (GT) HKS Panel Filter. The HKS I put in the MY10 is the same filter I took out of my MY05 GT. So yes, they do fit. Custom leather heel pad to minimise carpet wear in the drivers footwell. Slotted front rotors. (Sherpa) 14'' 6 Spoke mags, Chrome Gear Shift (sick!), Alloy Pedals (sicker!), new positive and negative battery terminals, Alpine cda-9827 H/U, JBL GT 6x9's boxed and mounted (sickest!), Kicker DS650.2 component speakers mounted in the footwells in flibreglass pods, Alpine MRP-F200 4 channel amp (4x40wRMS), Rebadged with hektik chrome eBay badges, STi stickers for more powaaaa, "leather" handbrake boot, recarpetted with grey/black car carpet from Bunnings, sick Clarke Rubber boot mat, polished and waxed.
Mods: (GT) HKS Panel Filter. The HKS I put in the MY10 is the same filter I took out of my MY05 GT. So yes, they do fit. Custom leather heel pad to minimise carpet wear in the drivers footwell. Slotted front rotors. (Sherpa) 14'' 6 Spoke mags, Chrome Gear Shift (sick!), Alloy Pedals (sicker!), new positive and negative battery terminals, Alpine cda-9827 H/U, JBL GT 6x9's boxed and mounted (sickest!), Kicker DS650.2 component speakers mounted in the footwells in flibreglass pods, Alpine MRP-F200 4 channel amp (4x40wRMS), Rebadged with hektik chrome eBay badges, STi stickers for more powaaaa, "leather" handbrake boot, recarpetted with grey/black car carpet from Bunnings, sick Clarke Rubber boot mat, polished and waxed.
-
garbo41610 - -stickered-
- Posts: 1786
- Joined: Thu Jun 11, 2009 11:28 am
- Location: Emu Heights and Randwick depending on time of day
- Car: MY10 GT Wagon Steel Silver
- Real name: Phil
5 posts
• Page 1 of 1
Who is online
Users browsing this forum: No registered users and 14 guests