Page 1 of 1

Good Panel beaters in Melb?

PostPosted: Tue Jul 27, 2010 8:24 pm
by Kekotic
Hey guys, I went to a panel beaters today in my area and was quoted $800 to fit 3 items (2 of them to also be painted)
I know this place does a good job, but to me this seems a little over the top.

$822 to paint a tb STI replica boot spoiler and K2 Gear roof spoiler, to fit both of those (spoiler needs to be drilled in to the boot) and also to fit the ULTREX Front bar.
I tried to explain to the sales guy about the ULTREX front bar basically clipping on and only a couple of extra bits needed to be drilled, not quite sure he understood. As he was adamant the front bar had to be taken off?

Basically I have also found out that my K2 Gear roof spoiler probably won't be here in time to get this all done before the Melb cruise :cry: and it's best to get this all done at once.
So can anyone recommend me a good place in Melb to get the 2 items painted, and maybe if even someone who fitted their own ULTREX bar would be able to help me out in installing mine as it's supposed to be fairly easy, yet we all know how my first attempt at doing something to the car went....
As for the K2 Gear spoiler I could just put that on with double sided tape. Speaking of which, I went to bunnings and Autobarn today and neither had 3M tape, just other brands.

Does this price of $822 seem terrible to anyone else or is it just me....
Surely $400-500 would be more reasonable?

Re: Good Panel beaters in Melb?

PostPosted: Tue Jul 27, 2010 8:52 pm
by Gambit
keep me updated as well, as i;d like to get my front bar resprayed and a few other little dints fixed.

Perhaps a lib group buy type session with a quality workshop?

Re: Good Panel beaters in Melb?

PostPosted: Tue Jul 27, 2010 8:54 pm
by tangcla
Tony @ Auswide Panels, Ringwood. My car was there for the respray.

Re: Good Panel beaters in Melb?

PostPosted: Tue Jul 27, 2010 9:06 pm
by Kekotic
Thanks Clarence, I will look in to it!

Re: Good Panel beaters in Melb?

PostPosted: Tue Jul 27, 2010 11:07 pm
by Sentinel
Kieran,

Most of us fitted our own lips to our cars. I have both an STi one and an Ultrex one (I run the Ultrex one for daily uses and cruises in case I damage it!!). It's super easy to fit. You could do it yourself in 30mins tops.

I've used Waverley Body Repairs (Mount Waverley) for a fair few of my jobs over the years and found them to be pretty good - especially with color matching.

Cheers

Re: Good Panel beaters in Melb?

PostPosted: Wed Jul 28, 2010 8:36 am
by tangcla
Sentinel wrote:I run the Ultrex one for daily uses and cruises in case I damage it!!
lol - got OCD? :P

Re: Good Panel beaters in Melb?

PostPosted: Thu Aug 26, 2010 12:50 pm
by Kekotic
tangcla wrote:Tony @ Auswide Panels, Ringwood. My car was there for the respray.


I just called Tony, he was unsure he could match the Satin White paint....lol

Not so sure about that place Clarence!
I'll try your recommendation Steve

Re: Good Panel beaters in Melb?

PostPosted: Thu Aug 26, 2010 12:54 pm
by Kekotic
I only just found out today that I have tomorrow off work. Was hoping to get it done tomorrow, but of course such short notice :(
Might have to try these stupid Phil Mundys rip off people as I'm not sure when else I will get a chance to get it all done.

Re: Good Panel beaters in Melb?

PostPosted: Thu Aug 26, 2010 1:03 pm
by Kekotic
Well that was....easy...

Phil Mundays booked me in for tomorrow, the guy on the phone remembered me from when I went in person to get the quote. Looks like I'll have my spoilers on tomorrow, and might even be able to take the K2 gear one home after it's been painted to let it set so I don't have to wait until Monday.
Unfortunately it's probably going to set me back $500 to get this stuff done (install front lip and boot lip + paint k2 gear spoiler), but better than doing the front lip install myself and buggering it up!

Re: Good Panel beaters in Melb?

PostPosted: Thu Aug 26, 2010 7:46 pm
by Drew
Hey Kieran,

Munday's did the drivers side of my car, and you can't pick it... their workmanship is spot on...

Re: Good Panel beaters in Melb?

PostPosted: Sun Sep 26, 2010 6:17 pm
by marki
Anyone recommend a good panel shop in the northern suburbs - melbourne?