club.liberty.asn.au

as title that I mentioned, I hv searched with many sites, still cant see any, only found a front lip, side skirt.........thats all!!

i thought that for 04-06, you can get any of the aftermarket front bars but you'll also need to get a new grille.
The lights of all the 04-06 are all the same, just that the 3RB has a different front bar with a different grille.
Other than that, I think that they're all interchangable (i.e. 04-06 3RB front bar & grille can go onto any other
04-06 lib, and the 04-06 lib can have any front bar but also needs the grille)

Any pre-facelift front bar will fit the 3RB. You might need different foglights and foglight mounts though.

If you get stuff designed for the pre-facelift Spec.B (like my one) then you keep your grille.

Does anyone with aftermarket front bars for a pre-facelift model want to upload their pics into here? I know I would appreciate it!

gubbo wrote:i thought that for 04-06, you can get any of the aftermarket front bars but you'll also need to get a new grille.
The lights of all the 04-06 are all the same, just that the 3RB has a different front bar with a different grille.
Other than that, I think that they're all interchangable (i.e. 04-06 3RB front bar & grille can go onto any other
04-06 lib, and the 04-06 lib can have any front bar but also needs the grille)

therefore, I can get any MY04-06 2.0/2.0T after market front bar with the MY04-06 2.0/2.0T grille, then
i.e. it will look excatly the same as 2.0N/A?? haha
r u guys 100% sure??

Thx GUBBO and CLARENCE

Posseltperformance wrote:Does anyone with aftermarket front bars for a pre-facelift model want to upload their pics into here? I know I would appreciate it!

i got some in my PC, hope u can get some idea abt this!! hehe
some of them r the forums members!!

hin249 wrote:therefore, I can get any MY04-06 2.0/2.0T after market front bar with the MY04-06 2.0/2.0T grille, then
i.e. it will look excatly the same as 2.0N/A?? haha
r u guys 100% sure??

Yes it should fit. I have been toying with the idea as well but it's way down the list of priorities at the moment. Not sure how much it would cost.

hin249 wrote:

mmmm puts me in mind of the old RS Turbo. Tasty

The memories, I sometimes miss my Liberty

I got a quote for the Gialla front bar from the Phat - it was around $1400 (from memory) delivered with LED gialla foggies. Experience from the last car tells me between $600 - $900 to get it fitted and painted. $1000 if it doesn't fit too well and requires some work.

total should really be under 2K on the car lookin sexy

I really like this setup. Is it made by Blitzen? What's the name of it?

It's called DAMD here's the link: http://www.rhdjapan.com/damd-frp-full-a ... -d-f-62371
also try this site http://www.japanparts.com/db/partslist. ... =11&page=1

Some nice front bars there...

Bc8282's front bar above, can anyone tell me what bar it is and where you can get it from?