club.liberty.asn.au

Curious to see if anybody has any information on this HKS engine cover, as I can't find anything other than a couple of sales posts in the US.

http://imgur.com/a/6CnQWMS

Also notice how the intercooler hole is much larger than the stock one. Would there be a:
- Larger intercooler
- Wider bonnet shroud
- Bottom mounting kit/shroud

One more big thing to mention is that there are no connector holes on the top part of the cover, rather, they're located on each side.

Any help would be greatly appreciated!

"..Epoxy has yellowed and cracked from heat in certain areas."

you sure you want this?

Hole would be suited to the hks cooler... and shroud etc.

I had a decent result wet sanding my carbon scoop with 800 grit and 2k clearing it... so far

2k can from paint spot...

If you’re cutting carbon, use a full respo preferably with face shield as the fibres are on par with asbestos.