gtbsti wrote:The oem wiring all exists in the post face gt spec b for the JDM folding mirrors. the only thing you'll need to add is the fold/unfold wires. its a cool feature as the jdm mirrors are convex with a blue mirror tint. cheers to bbb
What Gtbsti did, because he had both male and female jdm folding mirror plugs on the mirrors he imported, was to make a merge loom of the door loom part, so his mod is fully reversible.
You have options:
source a jdm door side plug from a folding mirror equipped car, a gen4 or tribeca (the audm facelift model had folding mirrors as standard iirc).
source that plug from eg the denso catalogue,
or cut the mirror plug itself so the other side fits in and splice the two wires for fold/unfold signals and run them to the folding mirror switch.
Or depin the folding mirror plug, repin it into a non folding mirror plug, leaving the two fold/unfold wires loose, and connect them to your added fold/unfold signal wire.
That added fold/unfold signal wire is a T (or V) configuration, the arms of the tee running to each mirror, the vertical part to the switch. 2 core wire, it’s advisable to fish or poke it through the door loom boots near the door hinges.
So in some aspects, on an rhd car, the mod is plug and play, just find a method to add the fold/unfold signal wires.