club.liberty.asn.au

There's a guide floating around to help you figure out if the rim/tyre combo you want will work with your liberty.
http://legacygt.com/forums/showthread.php/faq-offsets-sizes-rims-and-tires-gt-xenonk-version-4426.html

At stock height those wheels will poke out a fair bit, others on legacygt have lowered their cars on those rims and just had to roll the fenders + run camber to be able to fit them.

http://legacygt.com/forums/showthread.php/official-wheel-fitment-thread-182819p2.html
Check out that link and look about 1/4 of the way down the page, there's a chick running XXR's, and it details her setup.

Good luck to you dude

Nooobness wrote:hey guys
Sorry to bump an old thread
I recently bought a set of 527's and now wanna chuck some tyres on

will a 235/40/18 setup work at stock height without guard pulling? I am willing to roll, but just dont want to have to pull

Also, if i lower it on some BC BR's, will i need to pull? or is a roll just fine?

Thanks!

Jon

you could always check mine. been thinking of 235's myself, it's possible but needs to be higher height, otherwise you'll have to pull a little if i/you insist on being lowww. Plus a bit of chopping and cabletie-ing.

TheMightyGonzo wrote:There's a guide floating around to help you figure out if the rim/tyre combo you want will work with your liberty.
http://legacygt.com/forums/showthread.php/faq-offsets-sizes-rims-and-tires-gt-xenonk-version-4426.html

At stock height those wheels will poke out a fair bit, others on legacygt have lowered their cars on those rims and just had to roll the fenders + run camber to be able to fit them.

http://legacygt.com/forums/showthread.php/official-wheel-fitment-thread-182819p2.html
Check out that link and look about 1/4 of the way down the page, there's a chick running XXR's, and it details her setup.

Good luck to you dude

thanks for that info nick
Ill probably just fit them on with 225's first and then install BC BR's later

btw i like ur profile pic bro what's it meant to be anyway LOL

Jon

renan_don18 wrote:

Nooobness wrote:hey guys
Sorry to bump an old thread
I recently bought a set of 527's and now wanna chuck some tyres on

will a 235/40/18 setup work at stock height without guard pulling? I am willing to roll, but just dont want to have to pull

Also, if i lower it on some BC BR's, will i need to pull? or is a roll just fine?

Thanks!

Jon

you could always check mine. been thinking of 235's myself, it's possible but needs to be higher height, otherwise you'll have to pull a little if i/you insist on being lowww. Plus a bit of chopping and cabletie-ing.

hey reenan! thanks for that advice. i think ill stick with 225's for now probably dont want any pulling for now
How did u get the camber on ur car? did u need to use any camber kits?

Cheers
Jon

Nooobness wrote:

renan_don18 wrote:

Nooobness wrote:hey guys
Sorry to bump an old thread
I recently bought a set of 527's and now wanna chuck some tyres on

will a 235/40/18 setup work at stock height without guard pulling? I am willing to roll, but just dont want to have to pull

Also, if i lower it on some BC BR's, will i need to pull? or is a roll just fine?

Thanks!

Jon

you could always check mine. been thinking of 235's myself, it's possible but needs to be higher height, otherwise you'll have to pull a little if i/you insist on being lowww. Plus a bit of chopping and cabletie-ing.

hey reenan! thanks for that advice. i think ill stick with 225's for now probably dont want any pulling for now
How did u get the camber on ur car? did u need to use any camber kits?

Cheers
Jon

the rears can do with the factory stuff but the fronts use the bc br camber tops. its not a lot and it wont be insane camberwear either. 225 are a comfy size, havnt had any trouble with cops with them

Nooobness wrote:
thanks for that info nick
Ill probably just fit them on with 225's first and then install BC BR's later

btw i like ur profile pic bro what's it meant to be anyway LOL

Jon

Haha, cheers. It's the great gonzo, my favorite muppet.