Spec B front - $$?
Posted: Wed Nov 14, 2007 11:14 amWhat's the price these days for a front Spec B bar for an MY04-05? And what other parts are involved to fit?
Page 1 of 1
Posted: Wed Nov 14, 2007 11:14 amPosted: Wed Nov 14, 2007 2:37 pmdo u mean MY07 spec b front bumper? if so answer is bloody expensive, fenders bonnet etc.
Posted: Wed Nov 14, 2007 4:09 pmSorry no - JDM MY04 SpecB.
Posted: Wed Nov 14, 2007 4:31 pmBar skin itself is about $700 but you'd need the dress rings for the driving lights as well, and a new STi lip, I have the price and parts list from my replacement earlier this year, I'll dig it out and post it up.
Posted: Wed Nov 14, 2007 5:40 pmThanks Scott - could you also get me any part numbers if required?
Do I need anything else like the foam behind the bumper skin? I *might* be looking at getting a secondhand bumper and foglight surround.
Do I need anything else like the foam behind the bumper skin? I *might* be looking at getting a secondhand bumper and foglight surround.
Posted: Wed Nov 14, 2007 7:13 pmOK, here's the numbers as far as I can tell...
Front bumper cover - $434.64 - 57704ag13
Fog Lamp assy N/S/F - $371.22 - 84501fe240
Fog Lamp assy O/S/F - $371.22 - 84501fe250
There are a tonne of clips etc but I reckon thos parts will get you started. My front bumper and fog lights were completely destroyed so this may be the COMPLETE fog light assembly but it appears to be the only mention... the only things mentioned are lower skirts but I can't see that would be the black plastic bit in the spec B bar.
remember the 3.0 bar takes a different lower STi lip to the GT and 2.5.
My guess is your foam bar support would be the same as the bars seem to be identical above the fog light section. If you need me to take some pics of the bar for comparison let me know.
EDIT: as an after thought, dump the foggies all together and run cold air induction from DS one
Front bumper cover - $434.64 - 57704ag13
Fog Lamp assy N/S/F - $371.22 - 84501fe240
Fog Lamp assy O/S/F - $371.22 - 84501fe250
There are a tonne of clips etc but I reckon thos parts will get you started. My front bumper and fog lights were completely destroyed so this may be the COMPLETE fog light assembly but it appears to be the only mention... the only things mentioned are lower skirts but I can't see that would be the black plastic bit in the spec B bar.
remember the 3.0 bar takes a different lower STi lip to the GT and 2.5.
My guess is your foam bar support would be the same as the bars seem to be identical above the fog light section. If you need me to take some pics of the bar for comparison let me know.
EDIT: as an after thought, dump the foggies all together and run cold air induction from DS one
Posted: Wed Nov 14, 2007 11:51 pmIf you had pics on hand that would be great! 
or you could just email them to me
or you could just email them to me