Spec B front - $$?

Body kits, seat covers, fluffy dice, and other non-performance mods.

Spec B front - $$?

Postby tangcla » Wed Nov 14, 2007 11:14 am

What's the price these days for a front Spec B bar for an MY04-05? And what other parts are involved to fit?
www.tangcla.com - photography

Canon 5D Mark III x2 | 16-35mm f/2.8L | 24-70mm f/2.8L IS | 70-200mm f/2.8L IS
100mm f/2.8L IS macro | 200mm f/2.0L IS | 580EX-II x2 | 430EX-II | PocketWizard TT1/TT5
User avatar
tangcla
 
Posts: 7409
Joined: Wed Aug 15, 2007 1:47 pm
Location: Melbourne, VIC
Car: B6 Audi S4 (4.2L V8)
Real name: Clarence
Profile URL: http://www.tangcla.com

Postby EJ25 » Wed Nov 14, 2007 2:37 pm

do u mean MY07 spec b front bumper? if so answer is bloody expensive, fenders bonnet etc.
EJ25
 
Posts: 1530
Joined: Fri Nov 03, 2006 7:34 am
Location: Sydney

Postby tangcla » Wed Nov 14, 2007 4:09 pm

Sorry no - JDM MY04 SpecB.
www.tangcla.com - photography

Canon 5D Mark III x2 | 16-35mm f/2.8L | 24-70mm f/2.8L IS | 70-200mm f/2.8L IS
100mm f/2.8L IS macro | 200mm f/2.0L IS | 580EX-II x2 | 430EX-II | PocketWizard TT1/TT5
User avatar
tangcla
 
Posts: 7409
Joined: Wed Aug 15, 2007 1:47 pm
Location: Melbourne, VIC
Car: B6 Audi S4 (4.2L V8)
Real name: Clarence
Profile URL: http://www.tangcla.com

Postby MIB » Wed Nov 14, 2007 4:31 pm

Bar skin itself is about $700 but you'd need the dress rings for the driving lights as well, and a new STi lip, I have the price and parts list from my replacement earlier this year, I'll dig it out and post it up.
06 3RB
MIB
 
Posts: 323
Joined: Mon Oct 09, 2006 8:46 am
Location: Brisbane

Postby tangcla » Wed Nov 14, 2007 5:40 pm

Thanks Scott - could you also get me any part numbers if required?
Do I need anything else like the foam behind the bumper skin? I *might* be looking at getting a secondhand bumper and foglight surround.
www.tangcla.com - photography

Canon 5D Mark III x2 | 16-35mm f/2.8L | 24-70mm f/2.8L IS | 70-200mm f/2.8L IS
100mm f/2.8L IS macro | 200mm f/2.0L IS | 580EX-II x2 | 430EX-II | PocketWizard TT1/TT5
User avatar
tangcla
 
Posts: 7409
Joined: Wed Aug 15, 2007 1:47 pm
Location: Melbourne, VIC
Car: B6 Audi S4 (4.2L V8)
Real name: Clarence
Profile URL: http://www.tangcla.com

Postby MIB » Wed Nov 14, 2007 7:13 pm

OK, here's the numbers as far as I can tell...
Front bumper cover - $434.64 - 57704ag13
Fog Lamp assy N/S/F - $371.22 - 84501fe240
Fog Lamp assy O/S/F - $371.22 - 84501fe250

There are a tonne of clips etc but I reckon thos parts will get you started. My front bumper and fog lights were completely destroyed so this may be the COMPLETE fog light assembly but it appears to be the only mention... the only things mentioned are lower skirts but I can't see that would be the black plastic bit in the spec B bar.

remember the 3.0 bar takes a different lower STi lip to the GT and 2.5.

My guess is your foam bar support would be the same as the bars seem to be identical above the fog light section. If you need me to take some pics of the bar for comparison let me know.

EDIT: as an after thought, dump the foggies all together and run cold air induction from DS one 8)
06 3RB
MIB
 
Posts: 323
Joined: Mon Oct 09, 2006 8:46 am
Location: Brisbane

Postby tangcla » Wed Nov 14, 2007 11:51 pm

If you had pics on hand that would be great! :) or you could just email them to me :)
www.tangcla.com - photography

Canon 5D Mark III x2 | 16-35mm f/2.8L | 24-70mm f/2.8L IS | 70-200mm f/2.8L IS
100mm f/2.8L IS macro | 200mm f/2.0L IS | 580EX-II x2 | 430EX-II | PocketWizard TT1/TT5
User avatar
tangcla
 
Posts: 7409
Joined: Wed Aug 15, 2007 1:47 pm
Location: Melbourne, VIC
Car: B6 Audi S4 (4.2L V8)
Real name: Clarence
Profile URL: http://www.tangcla.com


Return to Cosmetics

Who is online

Users browsing this forum: No registered users and 10 guests