club.liberty.asn.au

Hey,

I have seen a couple of people on here go crazy with the LED's and though I would do the same.
I have put the LED lights in my dome and map lights, just click straight in.

And on the door trims i have put a Blue 30cm strip LED light in the door pockets, and a White 60cm LED light to run along the bottom of the door trip to shine on the ground.

How did you manage to get the LED strip inside the door pocket?

it came with the double sided tape, and there is that little recess on the plastic mould, so i tucked it up under there so you cant see the actual lights

Sorry I should have been more specific.

How did you manage to get it in the door pocket without having the cable visible on the door trim? Or do you have the cable visible...

i drilled small holes up under the recess so the cables go straight through the holes, and once the lights are removed you wont see the holes as they are tucked away,
unless you lay on the ground and look up.

how did you do this and what did you connect it too?????? interior light???

cheers.
robbo.

Connects to the door's courtesy light

I recently changed my map lights, puddle lights, dome lights and put LED strips in the boot, very happy with the result!

Cheap too