Would these rims fit ?

[Khalood92]

I was really after that stance look, is there other rims that give that without being a pain in the ass to fit ?

[paggaz]

If you really want that look (controversial topic on this forum lol), it's achievable with coilovers, camber and a whole lot of stretched rubber.

EDIT: + rolled and slightly pumped guards

Is your Lib a Gen 4? Have a look at this thread for example: viewtopic.php?p=320823#p320823
Ben from Ichiban Imports is also running Rota t2r, and I think in the same specs you were wanting.

[James1000]

I was really after that stance look, is there other rims that give that without being a pain in the ass to fit ?

I had the same fitment rota wheels on my car, have a look at my car thread. It wasn't a pain in the ass at all tbh. It only ever scrubbed out when my car was really low.

To fit mine I have coilovers with camber plates at the front and 215/40 tires. You can easily fit a 225 and that's I will be running soon.

EDIT: My guards are rolled and slightly pumped.

[James1000]

Haha good timing, yeh I copied Ben from Ichiban

[paggaz]

Right on cue James!

[James1000]

On the topic, I hope you can get tyres cheap as I struggle to get 10,000 k's out of my fronts running neg camber

[Khalood92]

So I should the the xxr's ?

[Khalood92]

*get

[jslayz]

what about these:

http://www.rays-msc.com/wheels/index.cgi?d=115

http://www.rays-msc.com/wheels/img/115-2-170315.jpg

Comes in a 19 x 8.5 45offset.

Have to roll guards but with a 225 or 215 should fit nicely.

Forged and genuine FTW!!!

J

[seanmau5]

PS you won't get 'that stance look' with a wheel arch gap of 20mm..

[Khalood92]

what about these:

http://www.rays-msc.com/wheels/index.cgi?d=115

http://www.rays-msc.com/wheels/img/115-2-170315.jpg

Comes in a 19 x 8.5 45offset.

Have to roll guards but with a 225 or 215 should fit nicely.

Forged and genuine FTW!!!

J

yeah they look nice but im after 18's

[Khalood92]

I was really after that stance look, is there other rims that give that without being a pain in the ass to fit ?

I had the same fitment rota wheels on my car, have a look at my car thread. It wasn't a pain in the ass at all tbh. It only ever scrubbed out when my car was really low.

To fit mine I have coilovers with camber plates at the front and 215/40 tires. You can easily fit a 225 and that's I will be running soon.

EDIT: My guards are rolled and slightly pumped.

Your car looks good thats the exact look im going for, want my car to sit like that

[cruisn]

You can buy my WORK 11r's. 18 x 8.5 +45

Run a 215/45/18 on them (I did on my Outback) With the slightly taller side wall, stretch is not very noticeable, eg, doesnt look ridiculous. Maintains speedo accuracy.

Genuine JDM goodness, none of the Taiwanese/Chinese wheels. Matching spare, centre caps, nuts and easy fitment to go low.

[jslayz]

Cant believe these are still avail!

Grab them asap!

Mmmmmm genuine!