Dust/moisture cap doesn't fit with aftermarket LED headlight

Body kits, seat covers, fluffy dice, and other non-performance mods.

Dust/moisture cap doesn't fit with aftermarket LED headlight

Postby Esho » Sat Jun 17, 2017 10:30 am

Hi guys,

I was wondering if anyone else had this issue. I purchased some aftermarket LED headlights and because they are a bit bigger than the original headlights, the dust cap doesn't fit. I was able to clip the LED lights firmly into place but just can't
Get the dust cap to fit.

Can anyone recommend anything or if anyone has come across this, what they did?

Any assistance would be much appreciated.

Thanks.

Esho
User avatar
Esho
 
Posts: 11
Joined: Wed Feb 18, 2015 1:14 pm
Car: Subaru Liberty Tuned by STI MY06
Real name: Esho

Re: Dust/moisture cap doesn't fit with aftermarket LED headl

Postby fedaykin » Mon Jun 19, 2017 11:44 am

Did you purchase the complete headlight or just the bulb?
fedaykin
 
Posts: 428
Joined: Wed Apr 08, 2015 10:09 am
Location: Sydney
Car: MY10 GT Wagon 6MT
Real name: Ravi

Re: Dust/moisture cap doesn't fit with aftermarket LED headl

Postby Esho » Mon Jun 19, 2017 10:18 pm

fedaykin wrote:Did you purchase the complete headlight or just the bulb?


Just the bulb. https://www.ebay.com.au/itm/291660405709
User avatar
Esho
 
Posts: 11
Joined: Wed Feb 18, 2015 1:14 pm
Car: Subaru Liberty Tuned by STI MY06
Real name: Esho

Re: Dust/moisture cap doesn't fit with aftermarket LED headl

Postby Surge » Tue Jun 20, 2017 6:35 am

What I would expect you to probably need to so is cut a hole in the cap.
DIY romraider E85 tuned Subaru liberty GT Premium 2010 Auto.
New project: Lexus Soarer 2.5gtt jzz30 1992

[ACT]Free Tune help- Learning view, Romraider, ECU Flash
User avatar
Surge
 
Posts: 731
Joined: Sat Dec 08, 2012 1:28 pm
Location: ACT
Car: 2010 lib GT premium + Jzz30 soarer

Re: Dust/moisture cap doesn't fit with aftermarket LED headl

Postby Esho » Wed Jun 21, 2017 11:48 pm

Surge wrote:What I would expect you to probably need to so is cut a hole in the cap.



That's what I ended up doing. I was hoping for a better alternative e.g if I could get some soft plastic dustcaps. I bought fog lights LEDs at the same time and they were too big for the dust cap too. I wasn't able to fit the cap at all. So I had to leave the dust cap not connected.
User avatar
Esho
 
Posts: 11
Joined: Wed Feb 18, 2015 1:14 pm
Car: Subaru Liberty Tuned by STI MY06
Real name: Esho

Re: Dust/moisture cap doesn't fit with aftermarket LED headl

Postby fedaykin » Thu Jun 22, 2017 11:37 am

R.I.P. vision
Try these https://www.powerbulbs.com/au/product/p ... on-h7-twin
Swap one and drive around, see which one is better at the cutoff (for spotting things like animals, rocks etc. on the road while driving).
fedaykin
 
Posts: 428
Joined: Wed Apr 08, 2015 10:09 am
Location: Sydney
Car: MY10 GT Wagon 6MT
Real name: Ravi

Re: Dust/moisture cap doesn't fit with aftermarket LED headl

Postby Surge » Thu Jun 22, 2017 11:44 am

I had my hid kit installed with just holes cut and not a good seal for years. Honestly never had an issue with dust or anything. You could aways use some silicone or something to create and air tight seal.

My HIDs looked way better than the best h7 Philips bulbs I could buy at the time.

And because the light is still a projector light, the only difference is you don't get the headlight washers.
So clean your headlights manually. No big deal.
DIY romraider E85 tuned Subaru liberty GT Premium 2010 Auto.
New project: Lexus Soarer 2.5gtt jzz30 1992

[ACT]Free Tune help- Learning view, Romraider, ECU Flash
User avatar
Surge
 
Posts: 731
Joined: Sat Dec 08, 2012 1:28 pm
Location: ACT
Car: 2010 lib GT premium + Jzz30 soarer

Re: Dust/moisture cap doesn't fit with aftermarket LED headl

Postby Esho » Fri Jun 23, 2017 4:10 pm

Absolutely love the LED lights compared to the halogen lights. They are so much brighter and love the White light. ( just hoping I don't get them defected.) my only concern is using the fog lights when raining as its closer to the road and I don't have the dust cap on.
User avatar
Esho
 
Posts: 11
Joined: Wed Feb 18, 2015 1:14 pm
Car: Subaru Liberty Tuned by STI MY06
Real name: Esho

Re: Dust/moisture cap doesn't fit with aftermarket LED headl

Postby fedaykin » Tue Jun 27, 2017 11:19 am

Actually there's quite a difference optically between halogen and discharge projectors, but hey, bright foreground and narrow beam = awesome lights?! (no).

Oh yeah and LEDs, bright white light
Image
Image
fedaykin
 
Posts: 428
Joined: Wed Apr 08, 2015 10:09 am
Location: Sydney
Car: MY10 GT Wagon 6MT
Real name: Ravi


Return to Cosmetics

Who is online

Users browsing this forum: No registered users and 1 guest